Table of Contents
Advertisement
Configuration
Direction:
XTE Limit:
XTE Alarm:
WPT Pass Criterion:
Version 2.0
Sets all displays which indicate direction to True or Compass. If
you want the receiver to agree with your magnetic compass, select
Compass. The receiver will automatically add or subtract the ap-
propriate magnetic variation and deviation. Enter the compass de-
viation table into the receiver in this screen. You can differentiate
between True and Compass settings by observing the degree sym-
bol on any bearing or heading display. True is indicated by a de-
gree symbol (°), Compass is indicated by a degree symbol with a
small c under the symbol ( c ).
Sets the distance left or right from the course line you consider to
be the maximum allowable off-track error (known as cross-track
error, "XTE"). The PLOT screens will display the scaled cross-
track error distance. The NAV screens will indicate the cross-track
error in numerical format and present the cross-track error graphi-
cally scaled left or right of the course line.
Causes an alarm to sound if your position exceeds the maximum
XTE Limit defined above when Yes is selected. To disable the alarm,
select No (default) with the Change softkey.
Sets the waypoint passed determination method. There are five
methods available:
Complex:
This is the default setting. Passing the waypoint is determined by
reaching an imaginary perpendicular line. Or you can pass the
Operator's Manual
115
Advertisement
Table of Contents
