Table of Contents
Advertisement
Configuration
horizon, at which the receiver will attempt to track a satellite. Satellites
with an elevation below this angle will be tracked but will not be in-
cluded in the position solution. You can set the elevation limit to any
value up to 90°. For most marine applications, the default limit of 5° is
appropriate.
The Antenna Offset allows you to virtually offset your antenna. That
is, if you are forced to place the antenna in a location other than
where you want your position fix calculated (due to superstructure
or other high power antennas), you can place the antenna in a
practical location. Then enter the appropriate Antenna Offset, and
the receiver will calculate your position in the place where you
would have preferred to place the antenna.
The RAIM menu is available only in MX420 models where the RAIM
feature is enabled. For more detailed information about RAIM, please
refer to page 96 of this manual. Standard MX420 CDU will only show
the Elevation mask and Anttena offset menu items.
Version 2.0
Operator's Manual
109
Advertisement
Table of Contents
