Erasing A Track (Erase) - JVC XM-448BK Instructions Manual

5 Press ENTER on the main unit or on the remote control
unit.
ENTER
OR
The change made above is entered temporarily in memory. The display shows
"EDITING" and the TOC indicator lights up.
6 Press 0 on the main unit or on the cover panel of the
remote control unit to eject the MD.
OR
The data in memory is written in the MD before it is ejected.
The display shows "UTOCwriting" during MD writing operation.
•
•
To cancel editing:
Press EDIT repeatedly on the main unit or on the remote control unit before pressing
ENTER in step 5.

Erasing a track (ERASE)

A track can be erased from the MD. The track numbers after the erased track are
renumbered automatically.
1 Press EDIT on the main unit or on the remote control unit
to select "ERASE".
EDIT
OR
The ERASE indicator lights up.
Each press of the button switches the editing functions as follows.
2 Press SET on the main unit or on the remote control unit.
The current track number will blink on the display.
SET
OR
Be careful not to apply impact to the MD recorder during writing temporarily stored
data into the MD. Otherwise the recording may not be able to play later.
The data in memory is written in the MD also when the power is turned off while
"EDITING" is being displayed.
DIVIDE JOIN
(MD total playing time display or Disc title)
MOVE ERASE
Canceled
Blinks
Blinks
1 2 3 4 5
6
ALL ERASE
Blinks
1 2 3 4 5
6
Blinks
1 2 3 4 5
6
23