Philips 107T60 Service Manual

17" crt colour monitor

Hide thumbs Also See for 107T60:

Electronic user's manual (133 pages)

Declaration of conformity (1 page)

User manual (127 pages)

100

Table of Contents

Quick Links

Summary of Contents for Philips 107T60

Page 1: Table Of Contents
17" CRT Colour Monitor Service Service Service Description Important Safety Notice ----------------------------- 2 Technical Data -----------------------------------------3 Installations--------------------------------------------4 Warning and Notes-------------------------------------5 Troubleshooting----------------------------------------6 Mechanical Instructions----------------------------7 Electrical Instructions---------------------------------9 11 OSD Adjustments------------------------------------12 20 ISP (In System Programme)-----------------------21 23 DDC Instructions---------------------------------24 28 Hex Data of DDC 2B------------------------------29 Wiring Diagram-------------------------------------------33 Block Diagram---------------------------------------------34 Main Diagram &...
Page 2: Important Safety Notice
Under no circumstances should the original design be modified or altered without written permission from Philips. Philips assumes no liability, express or implied, arising out of any unauthorized modification of design. Servicer assumes all liability. * Broken Line...
Page 3: Technical Data
Video H-sync V-sync Mode Active Blanked This monitor is ENERGY STAR compliant. As an ENERGY STAR Partner, PHILIPS has determined that this product meets the ENERGY STAR guidelines for energy efficiency Technical Data Physical Specification Dimensions Weight Power supply Temperature(operating)
Page 4: Installations
Description of the On Screen Display What is the On Screen Display? This is a feature in all philips monitors which allows an end-user to adjust screen performance of monitors directly through an on screen instruction on window. The user interface provides user-friendliness and ease-of-use when operating the monitor.
Page 5: Warning And Notes
Warnings . Safety regulations require that the unit should be returned in its original condition and that components identical to the original components are used. The safety components are indicated by the symbol . In order to prevent damage to ICs and transistors, all high-voltage flash-overs must be avoided.
Page 6: Troubleshooting
107T6 CRT Go to cover page The following table lists possible common problems, and the recommended resolution. Having this problem? No picture (Power LED not lit) No picture (Power LED is flashing green) No picture (Power LED is green) Screen doesn't show when you turn on the monitor.
Page 7: Mechanical Instructions
0. General To be able to perform measurements and repairs on the "circuit boards", these unit should placed in the service position first. 1. Remove the rear cover in Fig. 1 and Fig. 2. -Remove 2 screws as shown -Remove back cover as shown -Remove pedestal as shown 2.
Page 8 Mechanical Instructions 107T6 CRT Go to cover page 4. Main panel with Bottom Tray -Remove 2 screws for disconnect the Bottom tray as Fig. 6. -Remove the bottom tray on press right and left side clip from fig. 7 to fig. 8. 5.
Page 9: Electrical Instructions
107T6 CRT Electrical Instructions Go to cover page...
Page 10 107T6 CRT Go to cover page Item Bias R, G, B Gain R, G, B * sRGB bright sRGB background br ightness * sRGB contrast * Corner-T, B * Pin Correction-T, B * S-wave, S-wave bal # V-offset # V-gain * Sub-contrast Sub contrast allowance range * Sub-brightness...
Page 11: Electrical Instructions
107T6 CRT Electrical Instructions Go to cover page...
Page 12 107T6 CRT Go to cover page The OSD Controls BRIGHTNESS To adjust your screen's brightness, follow the steps below. Brightness is the overall intensity of the light coming from the screen. A 50% brightness is recommended. 1) Press the button on the monitor. The BRIGHTNESS window appears.
Page 13 OSD Adjustments (Continued) 3) Press the button. The ZOOM window appears. 4) Press the button to adjust ZOOM. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. Close MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS...
Page 14 107T6 CRT Go to cover page 4) Press the button to move the image up or down. 5) When the position is adjusted, press the MAIN CONTROLS window, or press the ADJUST SIZE. 6) To adjust the vertical size, press the 7) When the size is adjusted, press the CONTROLS window.
Page 15 OSD Adjustments (Continued) 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the button to highlight ADJUST SIDE ANGLES. 5) Press the button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted. 6) To adjust the trapezoid, press the press the button to save your selection.
Page 16 107T6 CRT Go to cover page 7) When the rotation is adjusted, press the the ADJUST SHAPE window. BACK TO MAIN CONTROLS should be highlighted. 8) Press the button to return to MAIN CONTROLS. Smart Help After returning to MAIN CONTROLS..
Page 17 OSD Adjustments (Continued) 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS..To continue to EXTRA CONTROLS, press the CONTROLS is highlighted. Next, start with step 3 under EXTRA CONTROLS..To exit completely, press the button.
Page 18: No Signal Input
107T6 CRT Go to cover page 3) Press the button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be highlighted. 4) Press the button until DEGAUSS is highlighted. 5) To degauss your screen, press the degaussed, then the MAIN CONTROLS will reappear. CLOSE MAIN CONTROLS will be highlighted.
Page 19 OSD Adjustments (Continued) OSD LOCK OSD LOCK is a feature which disables the OSD controls. It can be used when the monitor is set up for demonstration purposes or when adjustment of the OSD is not desirable. Switch on OSD LOCK feature: Press and hold the button continuously for 15 seconds.
Page 20: Osd Adjustments
107T6 CRT Go to cover page Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. Your monitor may not include all the items in the OSD tree shown below. On-Screen Display file:///D|/EDFU/crt_17/edoc/english/OSD_2/OSDDESC.HTM (3 of 3) [2004/5/3 ?? 09:25:56] OSD Tree...
Page 21 Configuration and Procedure ISP (In System Program) software is provided to upgrade the firmware of CPU. System and equipment requirement: 1. An i486 (or above) personal computer or compatible. 2. Microsoft operation system windows 95/98. 3. EDID 46.EXE program (12NC: 3138 106 10103) and ISP Software (12NC:3138 106 10375) (Provided in the CD-ROM SERVICE MANUAL) 4.
Page 22 107T6 CRT Go to cover page Step 2. Load Hex file and input the bootcode. 1. Click , choose programs at start menu of Windows95/98 , find I2cHaI2c-Control Programs as shown in Fig. 8. Programms Fig. 8 2. Click the ''I2cHaI2c-Control Programs'',bring up the below window as shown in Fig.
Page 23: Isp (In System Programme)
2. At the submenu, type the path of EDID46 (For example, C:\107T6\EDID46.exe, as shown in Fig. 14). C:\107T6\edid46.exe Fig. 14 3. Click button. The main menu appears (as shown in Fig. 15). This is for initialize alignment box. Fig. 15 Step 4.
Page 24 Lenovo CK5S5 Go to cover page General DDC Data Re-programming In case the DDC data memory IC or main EEPROM which storage all factory settings were replaced due to a defect, the serial numbers have Analog DDC IC, & EEPROM to be re-programmed"...
Page 25 Step 3: Installation of EDID46.EXE Method 1: Start on DDC program Start Microsoft Windows. 1. The Program"EDID46.EXE" in service manual cd-rom be copyed to C:\ . 2. Click , choose Run at start menu of Windows as shown In Fig. 4. 3.
Page 26 107T6 CRT Go to cover page 2. Select the DDC2Bi as the communication channel. As shown in Fig. 11. 3. Click OK button to confirm your selection. 4. Click icon (Read EDID function) to read DDC EDID data from monitor. The EDID codes will display on screen as shown in Fig. 12. Fig.
Page 27 DDC Instructions (Continued) 107T6 CRT Go to cover page Next Next Click , bring up Fig. 17. Click , bring up Fig. 20. 107T4 Fig. 20 Next Click , bring up Fig. 21. - Click Finish to exit the Step window. Fig.
Page 28: Ddc Instructions
107T6 CRT Go to cover page 2. Access Factory Mode 1). Turn off monitor. 2). [Push " " & " " buttons at the same time and hold it ] + [Press power " " button untill comes out "Windows screen"] =>...
Page 29: Hex Data Of Ddc2B
**************************************************** EDID log file for LG tube **************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : E01C (HEX.) ID Serial Number : 1E240 (HEX.) Week of Manufacture : 19 Year of Manufacture : 2004 EDID Version, Revision Version Revision Basic Display Parameters/Features...
Page 30 107T6 CRT Go to cover page **************************************************** EDID log file for HF tube **************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : E01C (HEX.) ID Serial Number : 1E240 (HEX.) Week of Manufacture : 19 Year of Manufacture : 2004 EDID Version, Revision Version...
Page 31 **************************************************** EDID log file for CPT tube **************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : E01C (HEX.) ID Serial Number : 1E240 (HEX.) Week of Manufacture : 19 Year of Manufacture : 2004 EDID Version, Revision Version Revision Basic Display Parameters/Features...
Page 32 107T6 CRT Go to cover page **************************************************** EDID log file for SDI tube **************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : E01C (HEX.) ID Serial Number : 1E240 (HEX.) Week of Manufacture : 19 Year of Manufacture : 2004 EDID Version, Revision Version...
Page 33: Wiring Diagram
Wiring Diagram 107T6 CRT Go to cover page...
Page 34: Block Diagram
107T6 CRT Go to cover page LIGHT FRAME IC TDA4823 Self- test HORIZONTZL & VERTICAL SYNC PROCESSOR & B+ CONTROLLER CONTROL & MICRO-PROCESSOR & SAA4848 48MHz CRYSTAL EEPROM M24C04 -BN6 SWITCH MODE POWER SUPPLY INPUT TEA1507 Block Diagram Function Block of V30 107T6 ·...
Page 35 Main Schematic Diagram 0.4V 0.8V 25KV 0.6V 0.6V 12V2 -8V7 109V7 109V4 104V5 20V6 105V4 12V3 21V3 110V3 152V6 12V5 142V 140V 140V -128V5 -140V5 -129V 107T6 CRT Go to cover page 52V2 22V2 21V3 52V2 22V2 52V2 22V2 52V2 22V2 82V3 11V7...
Page 36 107T6 CRT Main Board C.B.A.-1 Go to cover page...
Page 37 Main Board C.B.A.-2 107T6 CRT Go to cover page...
Page 38: Video Diagram & C.b
107T6 CRT Go to cover page 68V5 68V5 68V5 Video Schematic Diagram 39V4 39V4 39V4 0.7V 0.4V...
Page 39 Video Board C.B.A-1 107T6 CRT Go to cover page...
Page 40 Video Board C.B.A-2 107T6 CRT Go to cover page...
Page 41: Control Diagram & C.b
Control Schematic Diagram & C.B.A 107T6 CRT Go to cover page...
Page 42 107T6 CRT Go to cover page A1 7701-1 A1 7701-2 A3 1711-8 A3 1711-11 A5 7702-8 A6 7311-2 A10 7311-17 A11 7311-19 A13 7331-21 A14 7331-23 WAVEFORM A1 7701-4 A2 7701-9 A4 7702-1 A4 7702-2 A6 7311-4 A6 7311-6 A11 7311-21 A11 7311-23 A15 7331-24 A2 7701-10...
Page 43: Waveform Diagram
B2 7502-C B1 7502-B B8 7804-35 B9 7804-39 B15 7804-53 B16 7617-B B22 7605-C B23 6605-AK B29 5610-1 B30 5610-2 B36 5610-9 B37 5610-14 WAVEFORM (Continued) B3 7804-18 B4 7804-20 B10 7804-45 B11 7804-46 B17 7617-C B17 7601-G B24 6605-K B25 7613-B B31 5610-3 B32 5610-4...
Page 44 107T6 CRT Go to cover page B43 7263-D B44 7264-G B46 7266-G B47 7266-D B49 7256-C B50 1802-5 B52 7402-B B53 7402-C B55 7401-1 B56 7401-2 B59 7401-6 B58 7401-5 WAVEFORM (Continued) B45 7264-D C1 1501-1 B48 7256-B C5 6101-1 B51 1802-6 C9 7102-6 B54 7802-6...
Page 45: Exploded View
Exploded View 107T6 CRT Go to cover page...
Page 46: Spare Parts List
107T6 CRT Go to cover page Model: 107T660/00 12NC:863900015483 Mechanical Parts 0001 313812754881 FRONT CABINET ASSY 0003 313812753282 PEDESTAL ASSY 0004 313812753491 CHIN ASSY 0041 313810460141 FRONT CABINET 0042 313810460121 BACK COVER 0044 313810459492 BASE 0045 313810460151 CHIN 0048 313810459471 LENS 0049 313810459531 FUNCTION BUTTON 0052...
Page 47 2162 202202000906 ELCAP SM 16V S 47U PM20 A 2163 202202000906 ELCAP SM 16V S 47U PM20 A 2164 202202000906 ELCAP SM 16V S 47U PM20 A 2251 202202000912 ELCAP SM 25V S 2U2 PM20 A 2252 203830100222 CAP MPP MPS 250V S 820N PM5 B 2252 203830100333 CAP MPP MPS 250V S 910N PM5 B 2255...
Page 48: Spare Parts List
107T6 CRT Go to cover page 6101 932205814682 BRIDGE GBU4K (VISH) Y 6102 933497950673 DIO REC RGP10J A (VISH) A 6103 933751660673 DIO REC RGP10D A (VISH) A 6105 933189210133 DIO SIG BAV21 A (PHSE) A 6106 933083990133 DIO SIG 1N4148 A (PHSE) A 6107 933083990133 DIO SIG 1N4148...
Page 49: Recommended Parts List
Recommended Parts List Model: 107T660/00 12NC:863900015483 0001 313812754881 FRONT CABINET ASSY 0003 313812753282 PEDESTAL ASSY 0004 313812753491 CHIN ASSY 0041 313810460141 FRONT CABINET 0042 313810460121 BACK COVER 0044 313810459492 BASE 0045 313810460151 CHIN 0048 313810459471 LENS 0049 313810459531 FUNCTION BUTTON 0052 313810451961 NAME PLATE 0053...
Page 50: Different Parts List
107T6 CRT Go to cover page Go to cover page Diversity of 107T60/93 comparing with 107T60/00 Item 12NC Description 863900015491 107T60/93 450 313810663371 CARTON 451 313810662202 CUSHION-TOP 452 313810662191 CUSHION-BTM 1052 313817869271 VB-1 ASSY(LG,SDI,CPT) 1056 313817876551 MAINSCORD IEC 10A 1M5 DET BK Diversity of 107T61/00 comparing with 107T60/00 Item 12NC...
Page 51 Diversity of 107C63/93 comparing with 107T60/00 Item 12NC Description 863900015535 107C63/93 1056 313816872191 POWERCORD NONSHIELD 1052 313817869271 VB-1 ASSY(LG,SDI,CPT) 1051 313817869331 MB-1 ASSY (LG) 1051 313817869341 MB-2 ASSY (CPT) Diversity of 107V68/93 comparing with 107T60/00 863900015563 107V68/93 1 313812754991 FRONT CABINET ASSY 3 313812753522 PEDESTAL ASSY 4 313812753641 CHIN ASSY 42 313810460251 BACK COVER...
Page 52 A. Power Supply & Power Saving Management B. Horizontal Deflection/Vertical Deflection/EHT Generator C. Video board & DDC 2B D. Digital Circuit & Micro-controller 2004-04-19 BRIEF CIRCUIT DESCRIPTION V32 107T6 Brief Circuit Description 1 inch Monitor TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 8639 000 15483...
Page 53 (< 1W). 1 inch Monitor TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 2004-04-19 Digital Controlled Auto-scan Color Display Monitor SAA4848, made by Philips, which incorporates 8639 000 15483 107T6 CRT Go to cover page...
Page 54 When Lightframe IC is enabled by pressing the LF key, RGB input signals will be amplified with an extra amplification factor up to 1.4. 2004-04-19 BRIEF CIRCUIT DESCRIPTION 1 inch Monitor TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 buck 8639 000 15483...
Page 55: Brief Circuit Description
OSD will disappear and SAVE AUTOMATICALLY after non-operation. c) Software will control the DPMS according to the SYNC status. 1 inch Monitor TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 2004-04-19 interrupt to do the fast detect of mode 8639 000 15483...
Page 56: General Product Specification
- POWER SAVING MANAGEMENT SYSTEM - MAXIMIZED CONTAINER LOADING - VESA DDC2B - LOW EMISSION MPRII/TCO 03/TCO99 (optional) 17" V32 GS4 107T6-71K CMTR 2004-04-16 Wayne Lin GENERAL PRODUCT SPECIFICATION FEATURES / BENEFITS TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 8639 000 15483...
Page 57 4.11 White color adjustment 4.12 Color tracking on full white pattern 4.13 Purity 4.14 Moire 4.15 Blemish 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 8639 000 15483 107T6 CRT Go to cover page...
Page 58 Certifications Safety Fulfil approbation requirements Reliability Mean time between failures 10.0 Quality assurance requirements 10.1 Acceptance test 11.0 Service ability 17" V32 GS4 107T6-71K CMTR 2004-04-16 Wayne Lin GENERAL PRODUCT SPECIFICATION TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 8639 000 15483...
Page 59 C. Impedance Video : Terminated with 75 ohms Sync : Terminated with 4.7K ohms pull down resistors. 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 Wayne Lin 2004-04-16 8639 000 15483 107T6 CRT Go to cover page...
Page 60 Assignment H. freq. V. freq. 31.5 70Hz (VGA) 31.47 KHz 60Hz (VGA) 43.3 85Hz (VESA) 46.9 75Hz (VESA) 53.67 KHz 85Hz (VESA) 60.0 75Hz (VESA) 68.7 85Hz (VESA) 64.0 60Hz (VESA) TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 8639 000 15483...
Page 61 The AUTOSCAN color monitor must be capable of displaying standard resolutions within the vertical(refresh) frequency range of 50 to 160 Hz and horizontal scan range of 30 -71 KHz. 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 70 Hz 85 Hz 75 Hz 72.8Hz...
Page 62 Sync polarity Vertical Frame border = 0 Total size = 13.333 ms Display size = 12.800 ms 3.232 us Rear porch 0.448 ms 1.616 us Sync width 0.064 ms Sync polarity = TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 8639 000 15483...
Page 63 =10.836 us Rear porch = 2.201 us Sync width = 1.016 us Sync polarity 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 Vertical Frame border Total size = 11.756 ms Display size = 11.179 ms Rear porch 0.503 ms...
Page 64 Total size = 20.317 us Display size 4.064 us Rear porch 1.270 us Sync width Sync polarity = TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 Vertical = 14.268 ms = 11.122 ms 1.907 ms 0.064 ms Vertical = 11.754 ms 9.244 ms 1.585 ms...
Page 65 = 16.000 us Rear porch 1.280 us Sync width 2.400 us Sync. polarity = 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 Vertical Frame border Total size = 9.995 ms Display size = 9.481 ms Rear porch 0.435 ms...
Page 66 = 13.653 us Display size = 13.599 ms 1.920 us Rear porch 1.813 us Sync width Sync. polarity TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 Vertical = 9.997 ms = 9.387 ms 0.548 ms 0.047 ms Vertical = 13.417 ms 0.784 ms 0.060 ms...
Page 67 : 1.5M Power cord type : 3 lead plug power cord with protective earth plug or IBM hooded 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 Vertical Frame border Total size = 13.333 ms Display size = 12.8 ms...
Page 68 : 5% Max. (pulses of 0.70H) : 5% Max. Light output Contrast (full white) Minimum not visible 30 ± 5 FL. Maximum TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 Compliance Power Requirement Mandatory <= 75w Mandatory <= 1 w Mandatory <= 1 w Mandatory <= 1 w...
Page 69 MPRII < 250 nT TCO< 200 nT Electrostatic Potential < +/- 500 V 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 : £ 1.0 % : £ 1.0 % : £ 1.0 % Band II VLF (rms) MPRII <...
Page 70 : H = 0, V = 0 mG, Z = 0 - 700 mVpp cross hatch - center(50%) - maximum(100%) : 306 ± 3 mm : 230 ± 3 mm |C- D| £ 5 mm TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 8639 000 15483...
Page 71 0.25 mm CRT Zone C 0.15 mm Zone A 0.25 mm Zone B 0.35 mm 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 x 100% x 100% 8639 000 15483 107T6 CRT Go to cover page...
Page 72 15 to 30 FL. 17" V32 GS4 107T6-71K CMTR 2004-04-16 Wayne Lin GENERAL PRODUCT SPECIFICATION characters to cover the entire picture. The characters should be clearly identified in all TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 8639 000 15483...
Page 73 Tilt and swivel base : 5 ° forward and 13° backward Tilt angle Swivel rotation : 90° leftward or rightward 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 Approval Mains plug Wire Connector CEBEC...
Page 74 : -25 degree C to 65 degree C : 5 to 95 % (W/O condensation) : 300 to 1100 mbar board, color brown W/ Pallet TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 Container size 40 High Cube W/ Pallet W/ Pallet 8639 000 15483...
Page 75 Sets / Block(PA) Sets / Block(PB) Blocks / Container(PA) Blocks / Container(PB) Total Sets 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 Container size W/ Pallet W/ Pallet W/ SLIP W/ SLIP SHEET SHEET...
Page 76 : 100G, <3m sec. 6 shocks : 23 C : 60 % :100kpa : Mechanical Guideline TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 PCE China & India PCE Standard a .10-30-10Hz. Amplitude: 19mm Sweep: 5, Duration: 15 min. 3 axes (Refer to GB9384-97) b.
Page 77 The monitor comply with the following EMI standards : - EN55022 B Emission - FCC Part 15 DOC C108.8 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 8639 000 15483 107T6 CRT Go to cover page...
Page 78 TUV, GS SEMKO NEMKO DEMKO FIMKO UL, DHHS ---- TOTAL HRS (POWER ON) X TOTAL SETS NBR. OF FAILURE SETS : 0.4 (Major) : 1.0 (Minor) TYPE :107T60/00 BRAND : PHILIPS 2004-04-16 ---- ---- ---- ---- BSM1 8639 000 15483...
Page 79 GENERAL PRODUCT SPECIFICATION FIG-1 IMAGE DIMENSION 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 303 mm 306 mm 309 mm 8639 000 15483 107T6 CRT Go to cover page...
Page 80 107T6 CRT GENERAL PRODUCT SPECIFICATION Go to cover page 306 mm |A-B| AND |C-D| < 5 mm FIG-2 IMAGE CENTERING 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 8639 000 15483 BRAND : PHILIPS 2004-04-16 Wayne Lin 2004-04-16...
Page 81 107T6 CRT GENERAL PRODUCT SPECIFICATION Go to cover page 306 mm < 2 mm FIG-3 IMAGE ROTATION 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 8639 000 15483 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16...
Page 82 107T6 CRT GENERAL PRODUCT SPECIFICATION Go to cover page 306 mm A=B=C=D < 2.0 mm FIG-4 IMAGE GEOMETRY 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 8639 000 15483 BRAND : PHILIPS 2004-04-16 Wayne Lin 2004-04-16...
Page 83 107T6 CRT GENERAL PRODUCT SPECIFICATION Go to cover page 100 mm ZONE B ZONE A 306 mm FIG-5 CONTRAST AND BRIGHTNESS MEASUREMENT AREA 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 8639 000 15483 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16...
Page 84 107T6 CRT GENERAL PRODUCT SPECIFICATION Go to cover page ZONE B ZONE A ZONE C 306 mm FIG-6 MISCONVERGENCE 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 8639 000 15483 BRAND : PHILIPS 2004-04-16 Wayne Lin 2004-04-16...
Page 85 DB < 1.50 mm DC < 1.20 mm DD < 1.20 mm (D measured between flash on / off) 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 BRAND : PHILIPS 2004-04-19 Wayne Lin 2004-04-16 306 mm Figure 7 Static EHT regulation distortion pattern...
Page 86 GENERAL PRODUCT SPECIFICATION 107T6 CRT Go to cover page Figure 8 Focus check character 17" V32 GS4 107T6-71K CMTR TYPE :107T60/00 8639 000 15483 BRAND : PHILIPS 2004-04-16 Wayne Lin 2004-04-16...
Page 87: Repair Flow Chart
A. Power Supply Failure 1. Symptom: Check 7102 Pin8 No startup sound 100V<Pin8<380V LED light off Check 1102/6101/ 7101/2105 Turn power off 2. Symptom: check the resistance for hicup mode with all output voltages +190, startup sound or +82, 6, 12, -12, 5, blinking LED check 6151-6158 short? Check 7155/...
Page 88 107T6 CRT Go to cover page Rough check for R, G, B B. Video 1. Video input=0.7V Repair Flow 2. 7331 Video output=2.5v 3. 7701 Video output>35V 1. Symptom: (with white pattern) Check hearter no picture =+6.3V green LED on 2.
Page 89 Repair Flow Chart (Continued) C. Horizontal deflection output repair flow: 1. Symptom: Check Hsync without 7605 base H-deflection Replace 5156 Check 2614 2. Symptom: parabola East/West corr. exist Enter factory mode 3. Symptom: check linearity data H-linearity in EEPROM (full freq. Range) 4.
Page 90 107T6 CRT Go to cover page D. Vertical Deflection Failure Symptom: one horizontal line V-size is abnormal too large/small Repair Flow Chart (Continued) Basic check +12V/-12V Check 3401, 3402, 3403, 3404 good Check 7401 Check 3407, 3408, 3411 Check 6401 good? Check 7401 Check 7804 Pin37 ramp...
Page 91 Repair Flow Chart (Continued) E. CPU (7804) check List 3, 2 IIC bus 6 ABL 52, 53, 50, 8 Hsync/Vsync Check Q1-Q3 12, 11, 10 (Q1, Q2, Q3) low: 0 S-cap switch hi: 1 Check CPU Pin16=5V Basic check Pin45/Pin46=48MHz Pin38=AGND Check idle status Check...
Page 92 107T6 CRT Go to cover page 20 HDRV 21. HFLB 22. Xray 23 Reset 24 Focus 29 LED driver Repair Flow Chart (Continued) To H-deflection 7617 base Check Pin21 Pulse If active Check from 0V to 5V To 7616 for the V-dynamic focus Check 25 Degauss active=hi...
Page 93 Repair Flow Chart (Continued) 33, 34 VOUT1/VOU2 35 EWDRV 49 Rotation 52, 53 Hsync/Vsync 55, 54 DDC bus Check Pin56 1. No H/V Sync&IF cable Pin5 floating 2. H/V Sync exist & IF cable Pin5 to ground 3. H/V Sync non-exist & IF cable Pin5 to gnd 4.
Page 94: Lightframe For Windows
Earlier Philips monitors or other manufactures monitors will not work with this special software. It is recommended that you install this software only on a Philips monitor designed to use it. These monitors can be identified by the LightFrame logo on the front of the monitor.
Page 95 LightFrame for Windows (Continued) 5. Click Yes. Bring up Fig. 5. Fig. 5 Note: Please exit all the other program before you install "LightFrame" program. 6. Click "Next", Bring up Fig. 6. Fig. 6 7. Click "Yes", Bring up Fig. 7. Fig.
Page 96 107T6 CRT Go to cover page Uninstall should you need to remove the LightFrame software, please follow these steps. 1) First, click on the start menu. 2) Next, highlight Settings. 3) Then, click on Control Panel. 4) Now, click on Add/Remove Programs 5) Finally, select LightFrame from the list and then click on the Add/Remove button.
Page 97: Lightframe For Windows
LightFrame for Windows (Continued) On button LightFrame 3 State and transition diagram Add/Remove button Combined with control bar appearance Off button Full screen button Help button LF Idle User clicks on button LF active Select first target User clicks Off button User selects first target User clicks Off button...
Page 98: Repair Tips
107T6 CRT Go to cover page 0. Warning All ICs and many other semi-conductors are susceptible to electrostatic discharges (ESD). Careless handling during repair can reduce life drastically. When repairing, make sure that you are connected with the same potential as the mass of the unit via a wrist wrap with resistance.
Page 99: Safety Test Requirements
All units that are returned for service or repair must pass the original manufactures safety tests. Safety testing requires both testing. Hipot Ground Continuity HI-POT TEST INSTRUCTION 1.Application requirements 1.1 All mains operated products must pass the Hi-Pot test as described in this instruction.
Page 100 The picture tube utilized in this chassis is specially constructed to limit X-radiation emissions. For continued X-radiation protection, the replacement tube must be the same type as the original, including suffix letter, or a Philips approved type. Parts Replacement Many electrical and mechanical parts in Philips television sets have special safety related characteristics.

This manual is also suitable for:

107t60/00 107t6

Philips 107T60 Service Manual

Quick Links

TABLE OF CONTENTS

Related Manuals for Philips 107T60

Summary of Contents for Philips 107T60

This manual is also suitable for:

Table of Contents