Print Orders - Canon DC330 Instruction Manual

• If the message "BUSY" does not
disappear, disconnect the USB cable
and restore the connection after a short
while.
Print Orders
To cancel the print order, set
(.T)
the
number of copies to O.
4 Repeat steps 1-3 to mark
additional images with print orders
or press
[FUNC.]
twice to close the
menu.
(CD 22)
• Depending on the connected printer, you
can change some print settings before
step 3 (CD 61).
• Cancel Printing/Printing Errors (OJ
63).
• Restarting Printing: Open the print settings
menu as explained in step 2. In the print
settings menu, select [RESUME]"" and
CD
NOTES
1
Connect the camcorder to the
printer using the supplied USB
cable.
Refer to PC Connection Diagram
(OJ 68).
2
Open the print settings menu.
[FUNC.]
0
[m MENU]
0
[..
~
PRINT]
The print settings menu appears.
The error message "SET
~
PRINT
ORDER" appears if you connect a
printer with direct print function and
select [..
~
PRINT] without having set
any print orders beforehand.
3
Select (..... , ...
~)
[PRINn and
press
~.
Printing starts. The print settings
menu disappears when the printing is
completed.
FUNC.
(CD
24)
Printing the Still Images Marked with Print
Orders
FUNC.
OJ
FONC.
(CD
23)
Selecting Still Images for Printing
(Print Order)
POINTS TO CHECK
Set the print orders before connecting
the USB cable to the camcorder.
[FUNC.]
0
[~
PRINT ORDER]
0
Press
00
;!Ii[QJ:
The image selection screen
appears.
You can mark in advance the still images
you want to print and set the desired
number of copies as a print order. Later,
you can easily print out the print orders
by connecting the camcorder to a
PictBridge-compatible printer (OJ 61).
You can set print orders for up to 998
still images.
~ FROM THE IMAGE SELECTION SCREEN
,.
1 Select (...
~
) the still image you
want to mark with a print order.
2 Press
00
to set the print order.
The number of copies appears in
orange in the box next to the print
order symbol
~.
3 Set (.T) the number of copies
desired and press
00.
64 • Photos