SMART Adio 340 Installation Manual page 7

Classroom amplification system
Table of Contents

Advertisement

CH AP TE R 1
Planning your installation
Choosing a location for the control unit
Install the control unit on the wall at the front of the room where the presenter can easily
access it. Select a location that is within 8' (2.4 m) of a power outlet and within 50' (15.2 m) of
cable distance from the room module. See page 13 for installation instructions.
Choosing a location for the microphone charging cradle
Install the microphone charging cradle within 5' (1.5 m) of a power outlet. See page 17 for
installation instructions.
3
|
1012080 Rev A1

Advertisement

Table of Contents
loading

Table of Contents