Installing Wall Speakers - SMART Adio 340 Installation Manual

CH AP TE R 2
Installing your SMART Audio system

Installing wall speakers

For each of the four speakers, install the wall speaker bracket on the wall, and then attach the
speaker to the bracket.
To install the wall bracket on the wall
1. Loosen the top and bottom knobs that secure the bracket to the wall speaker, and then
remove the bracket from the speaker.
2. Place the wall bracket against the wall where you
plan to install it, and then mark the screw holes with
a pencil.
IMPORTANT
To prevent audio feedback, install the speakers
5' (1.5 m) from the floor.
3. Move the bracket away from the wall, and then drill
holes at the marks.
4. Secure the bracket to the wall with the included
screws and drywall anchors.
To secure the wall speaker to the bracket
Place the wall speaker in the bracket, and then attach and
tighten the knobs to secure the speaker to the bracket.
To connect the speaker wires
Connect the positive speaker wire to the red connector on the speaker and connect the
negative speaker wire to the black connector on the speaker.
9 | 1012080 Rev A1