Table of Contents
Advertisement
CH AP TE R 2
Installing your SMART Audio system
To install the power supply
1. Hold the power supply mounting plate against the wall
where you plan to install it, and then mark the
anchoring holes on the wall with a pencil.
2. Lower the bracket from the wall, and then drill holes at
the marks.
3. Screw the mounting plate to the wall with the included
screws and drywall anchors.
4. Position the power supply so the power cable is on the
left, and then place the power supply in the mounting
bracket.
5. Attach the power supply brace to the bracket.
15
|
1012080 Rev A1
Power cable
Advertisement
Table of Contents
