Table of Contents
Advertisement
CH AP TE R 2
Installing your SMART Audio system
3. Screw the mounting plate to the ceiling with the
included screws and drywall anchors.
Attaching the room module to the mounting plate
Attach the room module to the mounting plate, and then connect the wires, cables and safety
tether.
To attach the room module to the mounting plate
1. Position the room module so the cable
connectors are facing the cabling area, and
then attach the room module to the
mounting plate pegs.
2. Slide the room module toward the cabling area until it locks into place.
3. Pass the room module safety tether through the cable hole, and then screw it to a secure
location in the ceiling.
11
|
1012080 Rev A1
Cabling area
Mounting plate peg
Cable connectors
Safety tether
Advertisement
Table of Contents
