Battery Remove; Battery Installation - KYMCO UXV 700i Owner's Manual

Maintenance And Lubrication

Battery Remove

1. Make sure the ignition switch is OFF.
2. Remove the under-hood hook & bolts.
3. Remove the battery cover screws.
4. Disconnect the negative (
(1) from the battery first, then disconnect
the positive (+) terminal lead (2).
5. Remove the battery.

Battery installation

1. Install in the reverse order of removal.
2. After installing the battery, check to see if
the battery cables are routed correctly.
NOTE:
First connect the positive (+) cable and then
negative (-) cable to avoid short circuit.
-
) terminal lead
67
(2)
(1)