Assembling The Mower; Delivery Checklist; Handlebar; Grassbag Attachment - Hayter Harrier 56 Owner's Handbook Manual

ASSEMBLING THE MOWER

Delivery Checklist

Handlebar

Grassbag Attachment

CS226
1.12
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook.
2. Grassbag.
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
(561 Only) Note: Prior to first use please fully charge the battery for
14 hours. (Refer to battery charging)
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Hold the engine stop lever in towards the handlebar and
unfold the handlebar to the operating position, before releasing. Tighten
both handlebar knobs to secure in position.
Take care to ensure that the control cables do not become snagged at
the pivot point.
CS227
Raise the rear deflector, lower the grassbag through the handlebar and
hook in position. Lower the deflector to rest on the grassbag.
3. Charger (561)
4. Ignition Key (561)
The grassbag is supplied in a partially
assembled condition. Before first use,
attach the 'P' Clip to the frame as
shown.