Setting Auto Surround-Auto Sr; Setting The Video Component Input Mode-Dvd Video/Dbs Video - JVC RX-ES1SL Instructions Manual

Basic settings
Setting Auto Surround—AUTO SR
You can enjoy Surround mode simply by selecting the source (with
digital input selected for that source).
Select "ON" when activating Auto Surround.
ON: • If multi-channel signal comes in, an appropriate
Surround mode will be turned on.
• If Dolby Digital 2 channel or DTS 2 channel signal
including surround signal comes in, "PLII MOVIE" will
be selected.
• If Dolby Digital 2 channel or DTS 2 channel signal not
including surround signal comes in, "STEREO" will be
selected.
• If Linear PCM signal comes in, nothing will change.
The AUTO SR indicator lights up on the display.
OFF*: Select this to deactivate Auto Surround.
* Initial setting
NOTES
• This function does not take effect in the following cases:
– While playing an analog source, and
– While selecting "DGTL D.D." or "DGTL DTS" as the fixed digital
input mode (see page 12).
• If Surround mode is automatically activated by Auto Surround, any
other Surround mode in use will be canceled temporarily. When the
multi-channel digital signal stops coming in, "PLII MOVIE" activates.
• If you press SURROUND with Auto Surround activated, Auto Surround
will be canceled temporarily for the currently selected source.
Auto Surround setting will be restored in the following cases:
– When you turn the receiver off and on,
– When you change the source,
– When you change the analog/digital input, and
– When you reset "AUTO SR" to "ON" again.
20
Setting the video component input
mode—DVD VIDEO/DBS VIDEO
When you use the component video inputs for the DVD player and/or
DBS tuner, you have to register the type of input terminals.
Without setting this correctly, you cannot view the correct input on the
TV.
S/C*: : Select when connecting the video component to
the composite video or S-video input terminals.
COMP.: : Select when connecting the video component to
the component video input terminals.
* Initial setting