Table of Contents
Advertisement
Setting the digital input (DIGITAL IN)
terminals—DIGITAL IN 1/2/3
When you use the digital input terminals, register what
components are connected to which terminals—DIGITAL IN 1/2/3
(see page 11) so that the correct source name will appear when
you select the digital source.
Select one of the following components for each terminal:
DVR/DVD For the DVD player (or DVD recorder).
VIDEO
For the component connected to the VIDEO IN jacks
on the rear of the receiver.
VCR
For the VCR.
TV
For the TV.
Initial setting: DVR/DVD (for "DIGITAL IN 1")
VIDEO (for "DIGITAL IN 2")
TV (for "DIGITAL IN 3")
NOTES
• You cannot assign the same component for different terminals.
The priority order for assignment is as follows:
"DIGITAL IN 1" > "DIGITAL IN 2" > "DIGITAL IN 3."
"DIGITAL IN 1" can be set to any component.
Ex.: When "DIGITAL IN 1" is set to "TV."
TV
DIGITAL IN 1:
"DVR/DVD," "VIDEO," and "VCR" are selectable for
"DIGITAL IN 2."
And when "DIGITAL IN 2" is set to "DVR/DVD."
TV
DIGITAL IN 1:
DIGITAL IN 2:
DVR/DVD
"VIDEO" and "VCR" are selectable for "DIGITAL IN 3."
• Setting "DIGITAL IN 1" affects "DIGITAL IN 2" and "DIGITAL IN
3" settings. When you have changed "DIGITAL IN 1," confirm the
components assigned to "DIGITAL IN 2" and "DIGITAL IN 3."
24
Setting the Auto Function mode
—AUTO MODE
The source will be selected automatically simply by turning on a
video component.
• This function takes effect for the video components connected
to the receiver using the SCART cable—DVR/DVD and VCR.
Auto Function mode works as follows:
• When a video component is turned on, the receiver selects the
video component as the source (and the TV input is changed
automatically).
• When a video component currently selected as the source is
turned off, the receiver changes the source to the video source
previously selected—DVR/DVD, VCR, or VIDEO.
AUTO MODE: AUTO1
Auto Function mode works when the receiver is turned on or
when TV Direct is activated.
AUTO MODE: AUTO2
Auto Function mode works when the receiver is turned on or
off, or when TV Direct is activated. (When a video
component is turned on while the receiver is off, TV Direct is
activated and the receiver selects the video component as
the source.)
AUTO MODE: MANUAL
You need to select the source manually.
Initial setting: AUTO MODE: MANUAL
When "AUTO MODE: AUTO1" or "AUTO MODE: AUTO2" is
selected, the AUTO MODE indicator lights up on the display.
NOTES
• When selecting "VCR" as the source, "AUTO MODE: AUTO1" or
"AUTO MODE: AUTO2" may not work if you only turn on the
VCR. If this happens, you may need to start playback to activate
Auto Function mode.
• When Auto Function mode is set to "AUTO MODE: AUTO2," the
TV Direct may be activated after recovery from a power failure.
Advertisement
Table of Contents
