Error Codes - Permobil C350 Owner's Manual

Owner´s Manual Permobil C350
ERROR CODE POSSIBLE CAUSE - SOLUTION
1 LED - Low battery voltage
Check the battery and the connections between the battery and the control unit.
2 LED - Open circuit, left drive motor
Check the connection to the right drive motor.
3 LED - Short circuit left drive motor
Check the drive motor connections and cable.
4 LED - Open circuit, right drive motor
Check the connection to the right drive motor.
5 LED - Short circuit right drive motor
Check the drive motor connections and cable.
6 LED - Charger connected
Remove the charge plug from the chargesocket on the control panel.
7 LED - Joystickerror
Make sure the joystick isn't actuated at switch-on, change the control panel.
8 LED - Control System Error
Check the contacts to the power module. If the fault persists, change the poweer module.
9 LED - Failure in wheel lock circuit
Check the connections to the magnetic wheel lock.
10 LED - High battery voltage
Check the battery and the connections between the battery and the control unit.
7+5 LED - Comunication error
Check the control panel cable for damage and make sure the cable connections
aren´t loose.
8+2 LED - Actuator error
If the wheelchair has more then one actuator, check which one is´nt working.
Make sure the cable connections aren´t loose.
103
Troubleshooting Guide