Operation & Setting; Getting Started - Technomate TM-500 User Manual

3. Operation & Setting

3.1 GETTING STARTED

Mini-Glossary:
Services = channels
Service List = Channel List
In order to set up the receiver, follow the instructions below:
1
TM-500/600
Turn on the TV and .
2
In the TV System Wizard menu, choose your TV system by [LEFT/RIGHT]
Navigation buttons. Press the [ GREEN
3
In the OSD Language menu , use the [UP/DOWN] Navigation buttons
to choose a language. Press the OK button to confirm.
(The OSD Language menu is in the Main Menu of (6)
Settings (6) OSD Language)
15
15
] button or press [OK]button on save to save.
Setup (3) System
4
In the Time Zone Setup menu, press the [OK] button to open a dropdown list.
Use the [UP/DOWN] Navigation buttons to choose your Time Zone and press the
[OK] button to confirm. Press the [GREEN] button or press OK on save to save.
5
In the DiSEqC ...menu, choose your configuration.
a. No DiSEqC = Fixed dish/antenna on one satellite
b. Simple = When using a 2 / 4 Way DiSEqC switch for multiple satellites
c.i. Complex = For a USALS motorized dish/antenna
c.ii. Complex = For a DiSEqC 1.2 motorized dish/antenna
d. For a non-standard configuration, select any of the above and proceed to (6).
16
16