Table of Contents
Advertisement
3. Operation & Setting
* TUXTEXT POSITION
: Press the [MENU] button to go to the Main Menu.
Go to - (6)
Setup
(3)
System Settings
press the [YELLOW] button (TuxText position)
To ensure that all transmitted information, clock, etc is displayed, you can adjust
the viewing border of your TV. Press the [HELP] button for further information.
RED
Press the [
] button to move the top left point of the rectangle and use
the [UP/DOWN/LEFT/RIGHT] Navigation buttons to adjust it.
Press the [
GREEN
] button to move the bottom right point of the rectangle
and use the [UP/DOWN/LEFT/RIGHT] Navigation buttons to adjust it. Press
the [OK] button to exit. Press the [
Note
If you can not see the rectangle, then they are out of range. Please
adjust the rectangle into the middle of the screen.
TuxText = Teletext.
TuxtText is a Plugin (additional software) that allows the receiver to decode
digital Teletext.
Note
Teletext is only available if the broadcaster transmits it.
45
(5)
OSD Settings
.
GREEN
] or [OK] button to save.
Press the [OK] button to open the Info-Bar to make sure that the PVR-Mode
is not activated. Press the [BLUE] button to open the Plugins menu.
Use the [UP/DOWN] Navigation buttons to go to Teletext and press the
[OK] button. Use the Navigation-Buttons to select a text page and press the
[OK] button to open the page. You do not need to type in a Text page
number in this mode.
Press the [EXIT] button to exit.
* TUXTEXT VIEWING OPTIONS
Press the [MUTE] button more than once to change between: Alpha mode,
Full mode and Invisible mode.
Alpha mode
: Teletext is slightly transparent.
Full mode
: Teletext is in original colors.
Invisible mode
: Teletext is invisible.
46
Hide quick links:
Advertisement
Table of Contents
