Rear Panel - Technomate TM-500 User Manual

2. Control and Function

2.2 REAR PANEL

1
SAT IN
Satellite Dish/Antenna cable connection. Turn the receiver OFF first
before connecting.
2
RF OUT
Connect to TV or VCR.
3
AUDIO L, R
RCA/Cinch cable to HiFi-Amplifier connection.
4
VIDEO
Composite video output for connecting to TV, AV monitor, etc.
5
COMPONENT(Y Pb Pr)
Digital Video output for Y Pb Pr
9
6
8
TM-500
9
10
TM-600
11
12
13
14
TV / VCR SCART
SCART cable to TV/VCR(AUX) connection(RGB, CVB-S, YPbPr).
7
MAIN SWITCH
Turn ON/OFF the TM-500/600.
POWER CABLE (AC IN)
100~240V AC (Auto-selectable), 50~60Hz+/-5%. Check the power
specification.
LOOP OUT
Loop Out to other devices. If connecting an analogue receiver, turn OFF the
receiver to watch an analogue program.
ANT IN
TV Antenna connection.
USB
Connect a USB 2.0 external HDD to upgrade software or to record/playback
(Max 500mA / TM-600 model only)
Ethernet
Communication port via HTTP, FTP, NFS, Telnet and Samba to access your
Hard Drive or to upload channel lists. This is also used to update the
TM-500/600's software.
RS-232C
Connect to the PC using a NULL Modem female-to-female RS232 cable to
upgrade the software by serial communication port.
S/PDIF (OPTICAL)
Connect with an appropriate optical cable to your HiFi-Amplifier or DSP. The
AC3 signal is also available if the selected channel transmits Dolby Digital
signals.
10