Related Manuals for Technomate TM-5500 Series
Summary of Contents for Technomate TM-5500 Series
- Page 1 TM-5500/5000 Quick Setup Installation Guide TM-5500 D/CI/DA/DACI/CIP/DAPCI TM-5000 D/CI/DA/DACI/CIP/DAPCI QUICK SETUP INSTALLATION GUIDE...
- Page 2 TM-5500/5000 Quick Setup Installation Guide Instruction Manual for Technomate TM-5500/TM-5000 series All Technomate receivers are fully tuned with 23 satellites and more than 3500 channels. How to View Pre-tuned Receivers- Fixed System (non-motorised) After connecting the receiver to the TV, turn ON the receiver. Press the atellite button on the remote.
- Page 3 TM-5500/5000 Quick Setup Installation Guide DiSEqC and select A. Press OK to save. Repeat this process to select mor satellites, for example Astra 19.2 degrees East. Go to DiSEqC and select B Press OK to save. Press Exit. Go to Auto-Search. Check the progress bar. If the signal quality is above 0%, the task is completed.
- Page 4 For Technomate CIP and DAPCI models only How to Setup a Normal 36Volt 4Cable Positioner Press the Menu button on the remote. Use the left/right arrows on the remote until you see the word “Password”.
- Page 5 TM-5500/5000 Quick Setup Installation Guide Auto Positioning and Motor Limit Setting In some circumstances, set your mechanical limit on the motor first to avo damages (see the instruction manual of the motor). Press Menu on the remote and go to Installation. On the Limit Setup, press OK.
- Page 6 TM-5500/5000 Quick Setup Installation Guide Once this is accomplished, go to Motor Control and use the left/right arrow on the remote to select Save. Press OK to Save. Repeat this procedure for other selected satellites. How to Setup One Motorised and up to 3 Fixed LNBs / Dishes System Repeat above but choose, A, for motorised system and “b/c/d”...
- Page 7 TM-5500/5000 Quick Setup Installation Guide To deselect a Favourite Channel, go to the selected name that you chos earlier and press OK. This will deselect it. How to Setup Parent Control (Lock/Unlock Channels) Press the Menu button on the remote. Use the left/right arrows on the remote until you see Edit Channel.
- Page 8 (which starts with HER). You will see an American date, for example 10.29.03 (the English date should be 29.10.03). To obtain the latest information about your software, go to www. technomate.com and go the Downloads page ow to Edit and Save PIDS Press the Menu button on the remote.
- Page 9 TM-5500/5000 Quick Setup Installation Guide press the Exit button the remote. Go to Auto-Search and press OK to tune the same satellite again (For Technomate Motorised Systems). Transponders Satellite Degree Frequency Symbol Polarity Name Rate PASS 3R-6B 45.0° W 12573...