Connecting The Speakers; Connecting Auxiliary Equipment - JVC MX-J111V Instructions Manual

CAUTION: Make all connections before plugging the Unit into an AC power outlet.
When you connect the Unit to TV
When you connect the Unit to VCR and TV
VIDEO
OUT
Connect VCR to LINE OUT and VIDEO OUT
To record Video CDs and CD-Gs on the VCR, connect VIDEO
OUT and LINE OUT to VCR.
Note: the LINE OUT jacks will transmit audio signals from the selected TAPE, CD or TUNER, to the connected equipment.
No audio signal comes out from the AUX IN jacks to the LINE OUT jacks.
5

Connecting the Speakers

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–)
terminals marked RIGHT on the System.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–)
terminals marked LEFT on the System.
SP-MXJ111V right
IMPORTANT: Use speakers with the correct impedance only.
The correct impedance is indicated on the back panel.

Connecting Auxiliary Equipment

VIDEO
OUT
Connect TV to VIDEO OUT
To play back pictures on your TV.
Connect VCR or other equipment to AUX IN
To listen to this source, press the AUX button.
AUX
IN
RIGHT LEFT
LINE
OUT
CAUTION:
SPEAKERS
SPEAKER IMPEDANCE
6 – 16 OHMS.
RIGHT LEFT
+
+
– –
Video in
Audio out
Audio in Video in
SP-MXJ111V left
Connect VCR to TV
so that you can view
the pictures on the
TV screen.
Video out
Video in