Table of Contents
Advertisement
q
Recording Hi-Fi Stereo Sound
(Only for VGH66OX)
This VCR
automatically records audio signals on two kinds of audio tracks.
Hi-Fi:
Using special&d
rotary heads, audio signals are recorded on the video track in the FM
format. Multi-sound broadcasts (stereo or bilingual programmes) are automatically recorded
on two channels,
Normal: Audio signals are recorded monaurally on the linear track. Stereo broadcast? are recorded in
mono, and only the main audio track of bilingual programmes is recorded.
*
Video cassettes recorded on
a non-i-M
VCR
can also be
played back. However, if the audio signats are recorded on two
linear channels, stereo programmes will be piayed back monaurally and bilingual programmes will be played back with
both the main and sub audio tracks mixed together.
l
Video cassettes recorded on this VCR can be played back on a non-Hi-Fi VCR. However, only the normal (linear) track will
be played back.
Switching
Input Signals (Only for VGH66OX)
Various sources of video and audio signals can be recorded as
shown in the following chart.
(a) Selecting a channel wilt record both video and
audio from the VCR
tuner.
(b) Selecting an external source position (to select an external
source
position,
press the INPUT
SELECT button or select a channel situated between the last channel and the first channel with the
CHANNEL 0 / 0 buttons) will record both
video and audio from an external source via the back-
panel AUDIO/VIDEO LINE
I
or
front LINE IN 2 terminal.
Input mode
Tuner
External 1
(LINE 1)
TV screen
Signals Recorded
Video track
Normal audio track
Hi-Fi audio track
7
Signals from tuner
---7
Signals from AUDIO/VIDEO (LINEI) socket on the rear of the
VCR
External 2
(LINE 2)
Signals from LINE IN 2 terminal on the front of the VCR
4",,
"
-----J
Recording
Audio Only
This VCR can record Hi-Fi audio-only signals.
0
Connect the audio source (CD play&-, etc.) to the AUDlO-IN L/R terminals on the front or rear of the
VCR,
@ Select the connected external position LINE IN
1
or 2 ("Ll" or "LZ" lights up) by
pressing
the
%
INPUT SELECT button or the 0 / 0 buttons.
Press the TAPE SPEED button on the remote controt to select SP or LP mode.
),, , , ,, ,, Press
t+
PC:
!?JQ~n~ I
'is 2
,r::' i
I
:
1'. . .
23
Hide quick links:
Advertisement
Table of Contents
