Sharp vc-a260x Operating Manual page 27

m
Recording with the Timer
When the clock is set
40 24l-l mode, "AM/
@ Set the start time with the numeric buttons or A /
[Start]
PM" will not appear.
v buttons and press the b button.
Numeric f
buttons
DATE
PR START STOP
*:r
IS/12 47 m
__,__ __ _*-_-
__,__ _-
_g-..- -:----- I
__,__ -- _:-_- -:-_---
[Stop1
Numeric
@
Set the stop
time with the numeric buttons or A /
buttons
l/2
A
V
buttons and press the b button.
DATE PR START STOP
*k
15/12 47 12rOO~n~P
__,__ __
I),
-*m-e _$_____
__I__ __ -I--- -,-_--_
__,__ -_ _~___ _g_____
[Tape Speed]
~:i~~ ;d;;z;,ay
0 Select the tape
speed with A or V button. (See
Intelligent Timer Recording (JUST REC) on
page 30*)
SET
0
[Timer review]
f-
DATE
PR
START STOP
15/12 47 l2r00Nl12r30PnSP
SET
I)
__,__ __ _I___ _,_____
0)
- v
2/a v v
0
CANCEL
rCLEAR
SELECT :A T
@ Press the
SET
button. To
programme additional
timer settings, repeat steps @ through 0.
MENU
0
I)
Normal Screen
@
To
return to the Normal Screen, press the MENU
button.
TIMER
ON/OFF
0
@
To
set the
VCR
for automatic timer recording,
I)
press the TIMER ON/OFF button and ensure the
TIMER
"IF]"
indicator lights on the VCR display.
ON/OFF
0 >
l
If the video cassette runs out before recording all the programmes, your VCR will stop, eject the cassette, and shut
off automatically.
l
If power is interrupted for more than 1 minute (power failure, etc.), all timer settings will be cancelled.
l
If the TIMER ON/OFF button is pressed when there is no cassette loaded, "Izl" flashes for 5 seconds, indicating
that timer recording is not possible.
l
If the TIMER ON/OFF button is pressed while a cassette with an uncovered erasure protection hole is loaded, "Q"
flashes and the cassette is ejected.
l
When "(!I" is lit, regular VCR operation, clock setting and setting/cancelling/confirming timer positions are not
possible. For regular VCR operation, clock setting and setting/cancelling/confirming timer positions, press the
TIMER ON/OFF button to disengage the timer ("0" disappears), and then turn on your VCR.
l
During timer recording, the timer cannot be set.
l
To terminate timer recording, press the STOP button during timer recording.
l
If no buttons are pressed within one minute while setting a timer programme position, the mode automatically
returns to the previous mode.
l
If the same time is input for the start time and the
stop
time, the timer setting will be cancelled.
28