Only For Vc-H600X; Recording Hi-Fi Stereo Sound - Sharp VC-H600X Operation Manual

~R
ecording Hi-Fi Stereo Sound
(Only for VC-H600X)
This VCR automatically records aud}o s!gnals on two kinds of audio tracks.
Hi-F{.
Using specialized rotary heads audio signals are recorded on the video track in the FM
format. Multi-sound broadcasts (stereo or bilingual programmed) are automatically recorded
on two channels.
Normal Audio signals are recorded monaurally on the linear track Stereo broadcasts are recorded In
mono, and only the main audio track of bilingual programmed is recorded.
P
NOTES:
Video cassettesrecorded on a non-Hi-Fi
VCRcanalsobe played back However, if theaudiosignals arerecorded ontwo
Ilnear channels, s tereoprogrammed will be playedbackmonaurally a ndbilingual p rogrammed
will be played back with
both the main and sub audio tracks
mixed together.
. Video cassettesrecorded on this VCRcan
be played back on a non-Hi-Fi VCR, However, only the normal {linear) track WIII
be played back
Switching Input Signals
Various sources of video and audio signals can be recorded as shown in the following chart.
(a) Selecting a channel will record both video and audio from the VCR tuner
(b) Selectlng an external source position (to select an external source position, press the INPUT
SELECT
button or select a channel situated between the last channel and the first channel with the
CHANNEL @/ @
buttons) wili record both video and audio from an external source via the back-
panel AUDIONIDEO LINE ~ or front LINE IN 2 terminal
SignalsRecorded
inputmode TV screen
Video track Normal audiotrack
Hi-Fiaud!otrack
'"ner
7
Signalsfrom
tuner
~:;;a;~
q
Signals
from AU~lON1~EO
(LINE1) socket on the rear of
the VCR
"AV"
displayed
for VC-A400X
:?:L:;
7
SignalsfromLINE
IN 2 terminalon the frontof the
VCR
Recording Audio Only
This VCR can record Hi-Fi audio-only signals.
Connect the audio source (CD ~lay~r, etc.) to the AUDiO-lN L/R terminals on the front or rear of the
VCR.
Select the connected external position LiNE IN 1 or 2 ("LI" or '(L2° lights up) by pressing the
INPUT S ELECT
button or the @ / @ buttons.
Press the
TAPE SPEED
button on the remote control to select SP or 1P mode.
Press the REC button.
22