Vcr Display; Counter Clear - Sharp vc-a260x Operating Manual

ml
VCR Display
__ -
When the DISPLAY button is pressed, the display changes in the following way. (However, the following is the case
when the clock lime is set and displayed
in the 12-hour system.)
Example:
[TAPE REMAINING/CHANNEL]
<
Example:
[TAPE COUNTER/CHANNEL]
L
[PRESENT TIME/CHANNEL]
l
Dunng timer recording or Simple Recording Timer, the display shows the record
Example:
[OPERATING MO(DE/CHANNEL]
llnish time When the DISPLAY button is pressed.
the display changes In the following way. (If the 'YJJ" indicator on the VCR display IS lit, cancel the timer standby mode by pressing
the TIMER ON/OFF button and then turn on the power.)
Example:
[RECORD FINISH TIME]
Example:
[OPERATING MODE]
Example
[PRESENT TIME]
Example:
[COUNTER]
l
During Simple Recording Timer recording, "[3
"
lights.
Counter Clear
Make sure the counter is displayed, then press the
CLEAR button on the remote
control. "O:OO.OO" is displayed.
l
The counter will reset to "O:OO.OO" when the tape is rewound completely.
Example:
[REMAINING TIME]
35
--