The Linn Config Application; Starting Up The System - Linn SNEAKY MUSIC DS Setup & User's Manual

SNEAKY MUSIC DS
INSTALLATION AND SETUP

5 THE LINN CONFIG APPLICATION

The Linn Config application is used to configure the settings on the
Sneaky Music DS.
For full instructions on using the Linn Config see the Linn Config
Application document on the disc supplied with the Sneaky Music DS.

6 STARTING UP THE SYSTEM

This section describes the steps involved in turning on your Sneaky
Music DS system.
Basic system
1. Turn on the Internet router.
2. Turn on the computer and wait for it to finish booting.
3. Turn on the Sneaky Music DS (and the rest of your hi-fi system).
4. Start the Linn GUI.
Follow the instructions in the Operation chapter of the Sneaky
5.
Music DS owner's manual.
Full system
1. Turn on the Internet router and the Wireless Access Point.
2. Turn on the NAS and wait for it to finish booting.
3. Turn on the Sneaky Music DS (and the rest of your hi-fi system).
4. Turn on the wireless control point and start the Linn GUI.
Follow the instructions in the Operation chapter of the
5.
Sneaky Music DS owner's manual.
23
www.l i n n.c o .uk