The Linn Config Application - Linn KLIMAX DS Installation And Setup Manual

KLIMAX DS SYSTEM
INSTALLATION AND SETUP

8 THE LINN CONFIG APPLICATION

The Linn Config application is used to configure the settings on the
Klimax DS as well as a Klimax Kontrol and CD12.
1. Switch on the Klimax Kontrol and CD12.
2. Switch on the Klimax DS.
3. Launch the Linn Config if you have not already done so.
4. Highlight the Klimax DS and wait until the Linn Config connects to
the unit. The 'Version' tab contains information on the Klimax DS
for use by Linn Service personnel.
18
www.l i n n.c o .uk