The Wireless Control Point, And Installing The Linn Gui - Linn SNEAKY MUSIC DS Setup & User's Manual

Network music player
Hide thumbs Also See for SNEAKY MUSIC DS:
Table of Contents

Advertisement

SNEAKY MUSIC DS
INSTALLATION AND SETUP
3 FULL SYSTEM INSTALLATION (continued...)
The wireless control point, and installing the Linn
GUI and Config application
The Linn GUI is used for operating the Sneaky Music DS system on the
wireless control point. The Linn Config application allows you to view and
configure the settings on your Sneaky Music DS.
You may need to fully charge the battery on the control point before
continuing with this procedure (see the information supplied with the
control point), this may take an hour or longer.
1.
Update the control point with .NET 2.0, available at
www.microsoft.com/net.
2.
Copy the Linn GUI installer to the wireless control point.
3.
Copy the Linn Config installer onto the installation PC/laptop.*
4.
Run both the installers. Do not launch the Linn GUI or Linn Config
at this time.
5.
On the control point, disable the 'Auto Right Click' behaviour. This
can be done by locating the notification area at the bottom-right of
the Windows screen, and clicking the Touchkit: USB Controller icon
• Select the Setting tab
• Press the Option button
• Deselect 'Enable Auto Right Click'.
6.
The Linn GUI and Linn Config must be given firewall permissions to
allow them to operate. If the PC/laptop uses the Windows Firewall
the Linn software will be added automatically, providing you have
admin rights on the PC/laptop. If a different firewall is used, consult
the vendor's manual for instructions on how to add the Linn software
to the list of permissions.
Note:
Each time you update to a new version of the Linn GUI or Linn Config
software, you must add the new software to non-Windows firewalls' list of
permissions.
7.
To configure the Sneaky Music DS, follow the instructions in the
Linn Config Application document on the disc supplied with the
Sneaky Music DS.
* Install the Linn Config on the PC/laptop you will use to rip CDs. This
will allow you to make changes to the product's setup and run the
diagnostic tools.
19
www.l i n n.c o .uk

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents