Linn MAJIK DSM - Media Player Quick Start Manual

Also See for MAJIK DSM:

Quick start (2 pages)

Table of Contents

Contents

1 Unpacking
2 Positioning
3 Connecting
4 Setup
5 More Info and Troubleshooting
6 Warranty
7 Linn Records
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

Linn MAJIK DSM - Media Player Quick Start Manual

Unpacking

Remove product from packaging and place on a flat surface
Please retain all packaging for future transport of Majik DSM

Contents

1 x Majik DSM player
1 x mains lead
1 x slimline infra-red (IR) handset (with 2 x CR2032 batteries)
1 x Safety Information booklet

Positioning

Place unit on a flat, stable and rigid surface
Place unit within range of your network router or switch

Linn recommend the use of separate dedicated network components, including router, switch and wireless access point. Alternatively, a dedicated integrated router/switch/wireless device is preferable to simply connecting the unit directly to your home broadband router. Linn do not recommend a wireless connection between DS player and network. See www.linn.co.uk/networks for more info

Avoid positioning the unit in direct sunlight as this can interfere with the infra-red (IR) sensor on the front panel
Do not stack components and avoid placing near other heat sources
Do not block vents or site the unit in a cabinet which prevents air flowing from front to back
Allow at least 4" (10 cm) all the way around the unit for air circulation

Connecting

Connect each left and right channel on the Majik DSM to the equivalent terminal on your loudspeaker using your preferred connection method (spade / banana plug / bare wire) and ensuring a good tight connection is made in each case
Connect the Majik DSM Ethernet socket to your network using a standard Ethernet cable
If you have any external sources you wish to connect to your Majik DSM, such as a Blu-Ray or DVD player, satellite TV or games console, connect these to the appropriate analogue, HDMI, SPDIF or TOSLINK IN socket.
- If connecting HDMI video sources to your Majik DSM, you must also connect an HDMI cable from HDMI OUT back to your display device to ensure video is displayed
Connect any additional source components to the back panel using your preferred connection method - use socket 4/PH for any turntable you wish to connect (and do not connect line level source components to this socket)
- Your Majik DSM is configured as an MM (Moving Magnet) phono stage as default - please contact your Linn Specialist if you wish to change this to MC (Moving Coil) or convert socket 4/PH to line level
Connect your mains cable but do not power on the unit yet
If you have a NAS or ripping NAS then you should also ensure this is connected to your network and powered on (see www.linn.co.uk/nas for more info)

Setup

Add Majik DSM to network
1. Connect the Majik DSM as shown overleaf and power the unit on using the switch (front-right underside)
2. The Majik DSM should display a flashing blue dot for several seconds before changing to a Linn logo
3. Press the Sleep button to come out of sleep mode - if you have a large X displayed on the front panel then there is no active network connection
- Refer to step 5 or go to www.linn.co.uk/networks if you have any problems or questions
Play music
1. Install Kinsky on your PC or Mac from www.linn.co.uk/kinsky
2. Launch Kinsky and it will detect any DS players connected to the network and automatically select the first discovered DS player - if none is displayed, check the Room Selection menu or refer to Step 5
3. Select the Radio source from the Source Selection menu and double-click on an internet radio station to play (internet connection required)
4. Select the Playlist source (if you have music files stored on your computer) and go to your computer's music folder and drag any track(s) into your Kinsky playlist and press Play
5. Select the Songcast source (if you have multiple DS players) to 'tune-in' to another DS player within a Linn DS multiroom setup and synchronise playback
6. iTunes users - select iTunes from the Home page to browse your iTunes library and playlists, and select and play tracks as normal
- Go to www.linn.co.uk/kinsky for further help
Rip music
1. If you have a ripping NAS, simply insert the disc and ripping will start automatically (this should take around 5 - 10 minutes and the disc will eject once complete)
2. If you are using a standard (non-ripping) NAS or computer to store your music files, rip your music as normal and update your Media Server (if required)
- A Media Server is recommended to manage your music collection and provide access for your Linn DS player - see www.linn.co.uk/mediaserver for more info, including tips on mapping network drives and creating update shortcuts
1. Select Library from the Home page in Kinsky to view available media servers (e.g. Asset UPnP, Twonky) and double-click on a media server to browse and select music
- Go to www.linn.co.uk/ripping for more info on ripping music discs
Add wireless controller
1. Simply add a wireless tablet or smartphone to your network as normal
2. Search for Linn Kinsky from your device app store or download a suitable third-party control app for that device
3. Launch the software on your wireless device and it should auto-detect your Linn DS player and music library, and allow you to select and play tracks, change volume etc.
- Go to www.linn.co.uk/software for info on control software and third-party apps
Run Konfig
1. Install Linn Konfig on your computer from www.linn.co.uk/konfig
2. Launch Konfig and confirm that your Majik DSM is visible - Konfig is used to change advanced settings and update DS software (or firmware)
3. Konfig will also display any media servers or other Linn devices you have connected - if you can't see these devices in Konfig then you will be unable to find music on your NAS
4. Select your Majik DSM and choose the Configuration tab to change settings, including naming the Room and any connected sources, as well as entering a TuneIn (previously known as RadioTime) username to customise your internet radio presets
5. To update the software on a Linn DS player, select the Update tab and refer to www.linn.co.uk/ds_upgrade for more info
- Go to www.linn.co.uk/konfig if you have any problems or questions

More Info and Troubleshooting

Please visit www.linn.co.uk/majikdsm for further info on using and configuring your Linn Majik DSM, as well as links to help set up your network, rip discs and download music, and control your Linn DS player using a range of devices.

Warranty

Your Majik DSM has a 5 year parts and labour warranty as standard - please visit www.linn.co.uk if you wish to receive product news and notifications by e-mail.