Starting The Engine - Mercedes-Benz C-Class Coupe Operator's Manual

i
The power supply is switched off again if:
the driver's door is opened and
R
you press Start/Stop button : once
R
when in this position
As soon as the ignition is switched on, all the
indicator lamps in the instrument cluster light
up. If an indicator lamp does not go out after
starting the engine or lights up while driving,
see ( page 234).
Y

Starting the engine

Important safety notes
G
WARNING
If children are left unsupervised in the vehicle,
they could:
open the doors, thus endangering other
R
people or road users.
get out and disrupt traffic.
R
operate the vehicle's equipment.
R
Additionally, children could set the vehicle in
motion if, for example, they:
release the parking brake.
R
shift the automatic transmission out of
R
parking position P.
starting the engine.
R
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces
without sufficient ventilation.
G
WARNING
Flammable materials introduced through
environmental influence or by animals can
ignite if in contact with the exhaust system or
parts of the engine that heat up. There is a risk
of fire.
Carry out regular checks to make sure that
there are no flammable foreign materials in
the engine compartment or in the exhaust
system.
! Do not depress the accelerator pedal
when starting the engine.
General notes
i
The catalytic converter is preheated for
up to 30 seconds after a cold start. The
sound of the engine may change during this
time.
Automatic transmission
Shift the transmission to position P.
X
The transmission position display in the
multifunction display shows P.
i
You can also start the engine when the
transmission is in position N.
Starting procedure with the SmartKey
i
To start the engine using the SmartKey
instead of KEYLESS-GO, pull the Start/
Stop button out of the ignition lock.
Turn the SmartKey to position 3 in the
X
ignition lock (
soon as the engine is running.
Using KEYLESS-GO to start the engine
You can start the engine if a valid SmartKey
with the integrated KEYLESS-GO function is
in the vehicle. Always take the SmartKey with
you when leaving the vehicle, even if you only
leave it for a short time. Pay attention to the
important safety notes.
I n f o r m a t i o n P r o v i d e d b y :
Driving
page 131) and release it as
Y
133
Z