Roller Sunblind - Mercedes-Benz C-Class Coupe Operator's Manual

Sliding sunroof
88
Operating the sliding sunroof
Overhead control panel
To raise
:
To open
;
To close/lower
=
The sliding sunroof can only be operated
when the roller sunblind is open.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Press or pull the 3 switch in the
X
corresponding direction.
i
If you press the 3 switch beyond the
point of resistance, an automatic opening/
closing process is started in the
corresponding direction. You can stop
automatic operation by operating the
switch again.
Operating the roller sunblind for the
sliding sunroof
General notes
The roller sunblind shields the vehicle interior
from sunlight. The roller sunblind can only be
opened and closed when the sliding sunroof
is closed.
G WARNING
When opening or closing the roller sunblind,
parts of the body could be trapped between
the roller sunblind and the frame or sliding
sunroof. There is a risk of injury.
When opening or closing make sure that no
parts of the body are in the sweep of the roller
sunblind.
If somebody becomes trapped:
release the switch immediately, or
R
during automatic operation, push the
R
switch briefly in any direction
The opening or closing procedure will be
stopped.
Roller sunblind reversing feature
The roller sunblind is equipped with an
automatic reversing feature. If an object
blocks or restricts the roller sunblind during
the closing process, the roller sunblind opens
again automatically. The automatic reversing
feature is however only an aid and is no
substitute for your attention when closing the

roller sunblind.

G WARNING
The reversing feature does not react:
to soft, light and thin objects, e.g. small
R
fingers
when closing the roller sunblind again
R
manually immediately after automatic
reversing
This means that the reversing feature cannot
prevent someone being trapped in these
situations. There is a risk of injury.
When closing make sure that no parts of the
body are in the sweep of the roller sunblind.
If somebody becomes trapped:
release the switch immediately, or
R
during automatic operation, push the
R
switch briefly in any direction
The closing process is stopped.
I n f o r m a t i o n P r o v i d e d b y :