Downloading Routes - Mercedes-Benz C-Class Coupe Operator's Manual

Features
262
You will see the
Transferring data...
The vehicle data is sent to the Customer
Assistance center.
Depending on what the customer service
representative agreed with you, the voice
connection is re-established after the transfer
is complete. If necessary, you will be
contacted at a later time by another means,
e.g. by e-mail or phone.
Further functions of the vehicle remote
malfunction diagnosis include, for example:
transfer of service data to the Customer
R
Assistance center. If a service is overdue,
the COMAND display shows a message
about various special offers at your
workshop.
monthly status information e-mail on oil
R
level, air pressure, maintenance, brakes,
etc. If applicable, you will receive
information on special offers in the e-mail.
USA only: this information can also be
called up under "Owners Online" at http://
www.mbusa.com.
Information on the data stored in the vehicle
( page 26).
Y
Information on Roadside Assistance
( page 22).
Y

Downloading routes

Downloading routes allows you to transfer
and save predefined routes in the navigation
system. To do this, an SD memory card must
be inserted into the COMAND system. If no
SD memory card is inserted, you must insert
the card into the card slot on the COMAND
system before saving.
A route can be prepared and sent either by a
customer service representative or via the
mbrace portal on the Internet.
Each route can include up to 20 way points.
Once a route has been received by the
navigation system, you will see the
name> has been saved to memory card.
Do you want to start route
Vehicle Diagnosis:
message.
<route
guidance? message in the COMAND display.
The route is saved to the SD memory card.
To start route guidance: select Yes.
X
An overview of the route is shown in the
display.
i
If you select No, the saved route can be
called up later via the navigation menu.
Select Start.
X
Route guidance is started.
i
Downloaded and saved data can be called
up again in COMAND.
You can find further information in the
separate COMAND Operating Instructions.
Speed alert
You can define the upper speed limit, which
must not be exceeded by the vehicle.
If this selected speed is exceeded by the
vehicle, a message will be sent to the
Customer Assistance center. The Customer
Assistance center then forwards this
information to you.
You can select the way in which you receive
this information beforehand. Possible options
include text message, e-mail or an automated
call.
The data you receive contains the following
information:
the location where the speed limit was
R
exceeded
the time at which the speed limit was
R
exceeded
the selected speed limit which was
R
exceeded
Geo fencing
Geo fencing allows you to select areas which
the vehicle should not enter or leave. You will
be informed if the vehicle crosses the
boundaries of the selected areas. You can
select the way in which you receive this
information beforehand. Possible options
I n f o r m a t i o n P r o v i d e d b y :