Assist On/Off - Mercedes-Benz C-Class Coupe Operator's Manual

Menus and submenus
200
DISTRONIC PLUS
R
ASSYST PLUS service interval display
R
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent Display:
You will see the selected setting
Temperature
Speedometer [km/h]/Additional
Speedometer
Press the a button to save the setting.
X
Lights
Switching the daytime running lamps on/
off
Daytime running lamps are required by law
(Canada only). You cannot set the "daytime
running lamps" function via the on-board
computer.
Press the = or ; button on the
X
steering wheel to select the
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Day Lights function.
If the Day Lights
switched on, the cone of light and the
W symbol in the multifunction display
are shown in orange.
Press the a button to save the setting.
X
Further information on daytime running
lamps ( page 107).
Y
Settings
submenu.
function.
Outside
or Additional
[mph].
Sett. menu.
function has been
Switching Adaptive Highbeam Assist on/
off
Press the = or ; button on the
X
steering wheel to select the
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Adapt. Highbeam
If the Adapt. Highbeam
switched on, the cone of light and the
_ symbol in the multifunction display
are shown in orange.
Press the a button to save the setting.
X
For further information about Adaptive
Highbeam Assist, see (
Activating/deactivating surround
lighting and exterior lighting delayed
switch-off
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Surround Lighting
When the Surround Lighting
activated, the light cone and the area
around the vehicle are displayed in orange
in the multifunction display.
Press the a button to save the setting.
X
Deactivating delayed switch-off of the
exterior lighting temporarily:
Before leaving the vehicle, turn the
X
SmartKey to position 0 in the ignition lock.
Turn the SmartKey to position 2 in the
X
ignition lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
I n f o r m a t i o n P r o v i d e d b y :
Sett. menu.
function.
function has been
page 110).
Y
Settings
function.
function is