Table of Contents
Advertisement
Listening to Other Equipment
Listening to Cassette Tapes/Listening to Other Equipment
1
Press
.
• Each time you press
gles as follows.
AUX
: To listen to sound from other
equipment connected to the
AUX terminals on the main
unit.
AUX-DIGITAL
: To listen to sound from other
equipment connected to the
OPTICAL DIGITAL IN termi-
nal on the main unit.
2
Start other equipment playback.
• Refer to the operation manual for the con-
nected equipment.
3
Adjust the volume and make other
necessary settings.
• For adjusting the volume and making other
necessary settings, refer to "Basic Opera-
tions" (
page 18).
Adjusting the Sound Input
Level from Other Equipment
Adjusting the sound input level of the
AUX
1
Press
repeatedly to select
"AUX".
45
, the display tog-
2
(With "AUX" being displayed) Hold
down
until the input level
appears.
• Each time you hold down
toggles as follows.
For ordinary use.
(initial setting)
For increasing the level.
Adjusting the sound input level of the
AUX-DIGITAL
1
Press
repeatedly to select
"AUX-DIGITAL".
2
(With "AUX-DIGITAL" being
displayed) Hold down
input level appears.
3
Press
or
input level.
• You can adjust the input level within the
range of -12 dB to 12 dB (in increments of 2
dB). The initial setting is 0 dB.
4
Press
.
Changing the Display in the
Display Window
Press
.
• Each time you press
gles as follows.
Sound source name
(Time display)
Clock display
Introduction
, the display
until the
to adjust the
, the display tog-
(With an MD loaded)
Display of remaining
time for MD recording
Advertisement
Table of Contents
