Playback Timer - JVC LVT1220-002A Instructions Manual

Canceling the recording timer
In step 2 on page 69, select the timer number you
want to cancel, and then press
Even when you cancel the recording timer, the set-
ting remains stored.
Activating the recording timer again
In step 2 on page 69, select the timer number you
want to activate, and then press
until all of the setting procedure finishes. Then turn
off the main unit.
NOTE
• When you want to activate two or three recording
timers, leave a blank time of 2 or more minutes
between the ending time of the first recording timer
and the starting time of the second recording timer.
If the blank time is less than 2 minutes, the second
recording timer does not work.
• When the power plug is disconnected or the
power is cut, the recording timer settings may be
lost. If the settings are lost, set the clock and
recording timer again.
Convenient Functions

Playback Timer

1
.
Disc
MD
Cassette
tape
Radio
repeatedly
Other
equipment
2
Example: When "TIMER2" is selected
3
4
Example: When you want to set the playback
5
6
7
For the locations of remote control
buttons, refer to page 68.
Prepare the sound source you
want to play back.
Make sure that a disc is loaded.
( page 22)
Insert an MD. (
Insert a cassette tape. (
Preset the radio station whose broadcast
you want to listen to. (
Follow the operation manual for the
equipment.
Press repeatedly to select
"TIMER1", "TIMER2" or "TIMER3".
Timer number
Press .
Press , or
starting time and ending time.
time from 7:00 a.m. to 7:30 a.m.
• You can use the number buttons to set the
playback time. Refer to "Using the number
buttons" ( page 17).
• For setting the clock, refer to "Setting the
Clock" ( page 17).
Entering the "hour" →
"minute" →
Press or
"ONCE" or "EVERYDAY".
ONCE : The playback timer works once.
EVERYDAY : The playback timer works every
day.
Press .
Press or
"PLAY TIMER".
(Continued on next page)
page 46)
page 43)
page 21)
to set the
→ Entering the
to select
to select
70