Step 4: Setting Up The Wireless System - Sony BDV-N9100WL Operating Instructions Manual

Step 4: Setting up the
Wireless System
The main unit transmits sound to the
surround amplifier that is connected to the
surround speakers. To activate wireless
transmission, perform the following Steps.
1
Insert the wireless transceiver
into the main unit.
Rear panel of the main unit
2
Insert the wireless transceiver
into the surround amplifier.
Rear panel of the surround amplifier
Wireless transceiver
Wireless transceiver
3
Connect the AC power cord
(mains lead) of the main unit.
Before connecting the AC power cord,
make sure all connections in "Step 2:
Connecting the System" (page 20) are
secure.
4
Press "/1 to turn on the system.
"/1
5
Connect the AC power cord
(mains lead) of the surround
amplifier.
LINK/STANDBY indicator
When wireless transmission is
activated, the LINK/STANDBY
indicator turns green.
If the LINK/STANDBY indicator does
not turn on, see "Wireless sound"
(page 69).
GB
27