Sony BDV-N9100WL Operating Instructions Manual page 24

A
* High Speed HDMI cable
B
C
When you make connection
This connection can transmit both video and audio signals.
Note
• Video signals from the HDMI (IN 1/2) jacks are output to the HDMI (OUT) jack only when the
"HDMI1" or "HDMI2" function is selected.
• To output an audio signal from the HDMI (IN 1/2) jacks to the HDMI (OUT) jack, you may need to
change the audio output setting. For details, see [Audio Output] in [Audio Settings] (page 58).
When you make connection
Connect the system so that video signals from the system and other equipment are output
to the TV, and audio signals from the equipment are output to the system as follows.
Note
• If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings]
to [Off] (page 61).
• You can enjoy equipment sound by selecting the "AUDIO" function for connection C.
GB
24
HDMI cable* (not supplied)
Optical digital cord (not supplied)
Audio cable (not supplied)
A
B
High quality
HDMI OUT
DIGITAL OUT
OPTICAL
L
AUDIO
OUTPUT
R
Standard
quality
C
,