[Bd/Dvd Viewing Settings] - Sony BDV-N9100WL Operating Instructions Manual

Note
• When [Control for HDMI] is set to [On]
(page 61), [Audio Output] is set to [Speaker +
HDMI] automatically and this setting cannot be
changed.
• When [Audio Output] is set to [HDMI], the
output signal format for the "TV" function is
2-channel linear PCM.
x [Sound Effect]
You can turn on or off the system's sound
effects (SOUND MODE setting
For a 2-channel source, you can select
[Dolby Pro Logic], [DTS Neo:6 Cinema],
or [DTS Neo:6 Music] to simulate surround
sound.
[Sound Mode On]: Enables the surround
effect of the sound mode
Football mode (page 32).
[Dolby Pro Logic]: The system simulates
surround sound from 2-channel sources
and outputs sound from all speakers
(5.1 channel) (Dolby Pro Logic decoding).
[DTS Neo:6 Cinema]/[DTS Neo:6 Music]:
The system simulates surround sound from
2-channel sources and produces multi-
channel sound (DTS Neo:6 Cinema/DTS
Neo:6 Music mode decoding).
[2ch Stereo]: This system outputs the sound
from the front left/right speakers and
subwoofer only. Multi-channel surround
formats are downmixed to 2-channel.
[Off]: The sound effects are disabled. You
can hear sound as it is recorded.
x [Speaker Settings]
To obtain optimum surround sound, set the
speakers. For details, see "Setting the
Speakers" (page 49).
x [Auto Calibration]
You can calibrate the appropriate settings
automatically. For details, see "Calibrating
the Appropriate Speaker Settings
Automatically" (page 48).
.
(page 31))
and
(page 31)
x [Bluetooth AUDIO - AAC]
You can enable and disable AAC audio.
[On]: AAC audio if the Bluetooth device
supports AAC.
[Off]: SBC audio.
Note
You can enjoy high quality sound if the AAC is
enabled. In case you cannot listen to AAC sound
from your device, select [Off].
[BD/DVD Viewing
Settings]
x [BD/DVD Menu Language]
You can select the default menu language
for BD-ROMs or DVD VIDEOs.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language
by referring to "Language Code List"
(page 79).
x [Audio Language]
You can select the default track language
for BD-ROMs or DVD VIDEOs.
When you select [Original], the language
given priority in the disc is selected.
When you select [Select Language Code],
the display for entering the language code
appears. Enter the code for your language
by referring to "Language Code List"
(page 79).
GB
59