Setting Up The Wireless System - Sony HT-CT660 Operating Instructions Manual

Home theatre system
Hide thumbs Also See for HT-CT660:
Table of Contents

Advertisement

1
Prepare screws (not supplied)
that are suitable for the holes on
the back of the Sound Bar.
More than 25 mm
Hole on the back of the Sound Bar
2
Fasten the screws to the wall.
The screws should protrude 6 to
7 mm.
6 to 7 mm
3
Remove the center stand.
4 mm
5 mm
9 mm
680 mm
4
Hang the Sound Bar onto the
screws.
Align the holes on the back of the
Sound Bar to the screws, then
hang the Sound Bar onto the
2 screws.
Setting up the Wireless
System
The Sound Bar transmits sound from
the equipment to the subwoofer by
wireless communication.
1
Connect the AC power cord
(mains lead) of the Sound Bar to
a wall outlet (mains).
2
Connect the AC power cord
(mains lead) of the subwoofer
to a wall outlet (mains).
The  indicator of the
subwoofer lights up in red.
If it does not light up, press the
 button of the subwoofer and
wait for the indicator to light up in
red.
3
Press the  button of the
Sound Bar.
When the wireless connection is
made, the  indicator of the
subwoofer turns green. If it does
not turn green, perform the
operations of "Linking the system
(LINK)" (page 29).
17
GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sa-ct660Sa-wct660

Table of Contents