[Easy Network Settings]; [Resetting] - Sony BDV-N9100WL Operating Instructions Manual

x [Renderer Set-up]
[Automatic Access Permission]: Sets
whether or not to allow automatic access
from a newly detected DLNA controller.
[Smart Select]: Allows a Sony DLNA
controller to find the system as the target
equipment to operate by using the infrared
ray. You can set this function to on or off.
[Renderer Name]: Displays the system's
name as it is listed on other DLNA devices
on the network.
x [Renderer Access Control]
Sets whether or not to accept commands
from DLNA controllers.
x [PARTY Auto Start]
[On]: Starts a PARTY or joins an existing
PARTY at the request of a networked
device compatible with the PARTY
STREAMING function.
[Off]: Off.
x [Registered Remote Devices]
Displays a list of your registered remote
devices.
x [Remote Start]
[On]: Allows turn on the system by a
device linked via network when the system
is in standby mode.
[Off]: The system cannot be turned on by a
device linked via network.
[Easy Network
Settings]
Runs [Easy Network Settings] to make the
basic network settings. Follow the on-
screen instructions.

[Resetting]

x [Reset to Factory Default Settings]
You can reset the system settings to the
factory default by selecting the group of
settings. All the settings within the group
will be reset.
x [Initialise Personal Information]
You can erase your personal information
stored in the system.
GB
63