Sony BDV-N9100WL Operating Instructions Manual page 61

x [Wireless Sound Connection]
You can make further settings for the
wireless system. For details, see "Further
Settings for the Wireless System"
(page 54).
You can also check the wireless
transmission status. When wireless
transmission is activated, [OK] appears to
the right of [Status].
x [Main Unit illumination]
[On]: The top panel display always is
turned on, soft-touch buttons indicator are
always lit and the brightness of the LED
indicator is the maximum.
[Auto]: The top panel display and soft-
touch buttons indicator are turned off and
the brightness of LED indicator is reduced
automatically if you do not operate the
system for about 10 seconds.
Note
When [Auto] is selected, only N button lights up
during playback.
x [HDMI Settings]
[Control for HDMI]
[On]: Turns on the [Control for HDMI]
function. You can operate mutually
between equipment that are connected with
an HDMI cable.
[Off]: Off.
[Audio Return Channel]
This function is available when you
connect the system to a TV's HDMI IN
jack that is compatible with the Audio
Return Channel function and [Control for
HDMI] is set to [On].
[Auto]: The system can receive the digital
audio signal of the TV automatically via an
HDMI cable.
[Off]: Off.
x [Quick Start Mode]
[On]: Shortens the startup time from
standby mode. You can operate the system
quickly after turning it on.
[Off]: The default setting.
x [Power Save Drive]
[On]: Reduces power consumption when
volume level is low.
[Off]: Normal status. The system can
output sound volume.
x [Auto Standby]
[On]: Turns on the [Auto Standby]
function. When you do not operate the
system for about 30 minutes, the system
enters standby mode automatically.
[Off]: Off.
x [Auto Display]
[On]: Automatically displays information
on the screen when changing the viewing
titles, picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
x [Screen Saver]
[On]: Turns on the screen saver function.
[Off]: Off.
x [Software Update Notification]
[On]: Sets the system to inform you of
latest software version information
(page 56).
[Off]: Off.
GB
61