4 Replacement Procedures
4.14 DC fan
Removing the DC fan
To remove the DC fan, follow the steps below and refer to Figure 4-24.
1. Peel off the insulator and remove the following screws securing the DC fan.
• M2.5×4B
2. Disconnect the fan harness from the connector CN3380 on the system board.
3. Remove the DC fan from the slot.
4-40
[CONFIDENTIAL]
FLAT HEAD
M2.5x4B FLAT HEAD
Fan harness
Figure 4-24 Removing the DC fan
×2
CN3380
PORTÉGÉ R700 Maintenance Manual (960-833)
4.14 DC fan
Insulator
DC fan