Toshiba PORTÉGÉ R700 Series Maintenance Manual page 373

4.25 LCD
Installing the LCD
To install the LCD, follow the steps below and refer to Figure 4-45 to 4-48.
1. Connect the LCD harness to the connector on the LCD and stick the insulator on
the connector (thick type of the LCD to the back and thin type of the LCD to the
front).
2. Set the LCD to the LCD cover and arrange the LCD harness in place.
3. Fix the LCD harness with the insulator.
NOTE: When laying a LCD harness, refer to the following figures.
PORTÉGÉ R700 Maintenance Manual (960-833)
4 Replacement Procedures
[CONFIDENTIAL] 4-79