Toshiba PORTÉGÉ R700 Series Maintenance Manual page 359

4.22 Touch pad/Fingerprint sensor board
6. Peel off the aluminum tape (AL TAPE) and peel off the fingerprint sensor board.
7. Remove the following screws and T-PAD board.
• M2×4C
NOTE: Do not reuse the removed fingerprint sensor board. Be sure to use a new
fingerprint sensor board.
M2x4C S-THIN HEAD
Figure 4-41 Removing the touch pad/fingerprint sensor board (3)
PORTÉGÉ R700 Maintenance Manual (960-833)
S-THIN HEAD
Fingerprint sensor board
4 Replacement Procedures
×2
Aluminum tape
[CONFIDENTIAL]
M2x4C S-THIN HEAD
T-PAD board
4-65