Alarm Sending - Beward N1250 Operatotion User Manual

NOTE:
You need to type the IP address of the device receiving CGI commands.
Port: type a port number that is used to connect to the device. The default value is 80.
User name: type a username to access the device (64 characters maximum).
Password: type a password to access the device (32 characters maximum).
Proxy server: if you use a proxy server, type its name or IP address (64 characters
maximum).
Proxy server port: if you use a proxy server, type its port number.
Proxy server username: if you use a proxy server, type a username to access it (64
characters maximum).
Proxy server password: if you use a proxy server, type a password to access it (32
characters maximum).
[Test]: click this button to check connection and the entered parameters. A window opens
that shows information about the test process.
NOTE:
Click [ОК] to save changes. Otherwise, the changes may not be saved.

7.3.2. Alarm Sending

This section allows you to configure sending of commands to an external alarm device
when an alarm event occurs. Select the option for [On] to enable this feature (Pic. 7.12).
N1250 Operations User Manual
Pic. 7.12
Chapter 7. SETTING: Advanced
67