Beward N1250 Operatotion User Manual page 33

RTSP: this item allows you to configure RTSP stream. You can enable it or disable and
change the value of the port (the default value is 554). This is a standard and reserved port, that is
why it is not recommended to change its value. You can set the value of the port between the
values of 1124 and 65535.
RTP: specify a port range to transfer data between camera and client (clients). The port
number is assigned automatically when connection is established. The port number is assigned
only during stream transmission. You can set the value of the port between the values of 1124 and
65535.
Image rotated: this menu allows the image to be rotated. The following options are
available: «None» - the image is not rotated; «Mirror» - the image is mirrored around the vertical
axis; «Flip» - the image rotated 180°; «Mirror» + «Flip» - the image is mirrored and rotated 180°.
Audio codec: this item allows you to enable [On] or disable [Off] a microphone connected
to the camera. G.711 is used as an audio encoding format. By default, the microphone is enabled.
Night mode: select the option for [Auto] to enable night mode or select the option for [Off]
to disable it for maximum sensitivity. The default value is [Auto].
Exposure mode: this item allows you to adjust shutter time to the illumination level.
 50 Hz: select this option if the camera is used indoor where AC-powered illumination
sources at 50 Hz are used.
 60 Hz: select this option if the camera is used indoor where AC-powered illumination
sources at 60 Hz are used.
 Auto: select this option if the camera is used under mixed illumination (sunlight and
indoor illumination) or under bright sunlight. If this option is selected the shutter time is
set to 1/7.5 to 1/120.
IMPORTANT:
When the camera is used under bright sunlight, the image may blink or be too light. To avoid this, select
the option for [Auto].
White balance: the following modes are available: [Auto] – automatic white balance;
[Fluorescent]; [Tungsten]; or [Black&White]. The default option is [Auto]. An important goal of
white balance is to render colors correctly.
 [Auto]: the camera looks at the overall color of the image and calculates the best-fit
white balance. This is a default option for the white balance item and it is recommended
to use it.
 [Fluorescent]: white balance is corrected according to fluorescent lightning.
 [Tungsten]: white balance is corrected according to tungsten lightning.
 [Black&White]: camera switches to black and white mode.
N1250 Operations User Manual
Chapter 6. SETTING: Basic
32