Beward N1250 Operatotion User Manual page 71

Threshold: allows adjusting the motion detection threshold for each of the areas. The
closer the slider to the right position, the more the image must change to activate the motion
detection.
Sensitivity: allows adjusting the motion detection sensitivity for each of the areas. The
closer the slider to the right position, the more the sensor is sensitive.
Motion detection 1: check this box to enable this area.
Motion detection 2: check this box to enable this area.
Motion detection 3: check this box to enable this area.
To set an area, drag the right bottom corner of the frame. You can change its size by
dragging any of its corners. To move an area, click and hold left mouse button on an area and
move it to the required position.
IMPORTANT:
When you configuring this menu, be aware that these parameters are applied to the other camera
functions, for example to recording to FTP etc.
N1250 Operations User Manual
Pic. 7.14
Chapter 7. SETTING: Advanced
70