on the display.
Clean the filters and reset this menu item (by touching the text box next to the item
"Elapsed Time").
.
.
.
DMX Values - The menu is used to read DMX values of each channel received by the fixture.
Product IDs - The menu is used to read the MAC Address ,RDM UID and RDM Label.
Software Version - Select this item to read the software version of the fixture modules:
Display System - A display processor on the display board in the fixture base
.
Module M - A pan/Tilt processor on the board in the fixture arm.
.
.
Module C1 - A strobe/magenta/yellow processor on the board in the fixture head.
Module C2 - A Cyan/CTO processor on the board in the fixture head.
.
.
Module I - A rot. gobo/stat. gobo/iris processor on the board in the fixture head
.
.
Module O - A focus/zoom/prism/frost/ processor on the board in the fixture head.
View Logs.- Use this menu to read fixture´s data which have been recorded during fixture operation. This
colected data allows easier troubleshooting...
...Fixture Errors.- Use this menu to read fixture errors which have occured during fixture operation.
There is a list of error folders:
Pan Errors
Tilt Errors
Dimmer 1 Errors
Dimmer 2 Errors
Colour Errors
Gobo Errors
Gobo Carousel Errors
Static Gobo Errors
Iris Errors
Focus Errors
Zoom Errors
.
.
.
...Fixture States.- Recorded following actions: Fixture On, Fixture Off, Lamp On, Lamp Off.
...Fixture Position.- Recorded installation positions of the fixture:
...Fixture Temperatures.- Recorded temperatures which have exceeded defined levels.
Note: The log buffer can contain 8000 records max. If the buffer is full, old data will be overwritten.
.
7.3 Tab "Personality"
User mode - The Robin 300 Plasma Spot allows you to recall up to 3 user settings. After switching the fixture
on for the first time, the User A settings is active. Now all changes made in the "Personality" menu , "Address-
ing" menu and the "Music Trigger" and " Preset Playback" items from the "Stand-alone" menu are saved to
the User A settings. If you now select the User B settings, from this moment the changes made in these menus
will be saved to the User B settings. After switching the fixture off and on, the User B setting is active. In this
way you may use the 3 fixture operating behaviours.
...User A Settings - the function recalls the user A settings.
...User B Settings - the function recalls the user B settings.
...User C Settings - the function recalls the user C settings.
.
.
Prism Errors
Prism Rotation Errors
Frost Errors
Cyan Errors
Magenta Errors
Yellow Errors
CTO Errors
Clean Air Filters
Overheated
Lamp Errors
Temp. Sensor Errors
.
.
.
.
0