Table of Contents
Advertisement
Touch any part of the screen or press the [ENTER/Display On] button to display the initial screen with the cur-
rent stored DMX address:
Touch the green arrow at the bottom right corner of the screen or press the [ENTER/Display On] button to enter
the " Address" menu.
An item (such as a Tab, menu item, text box, icon) may be selected from a screen by simply touching the item
in the list or by pressing the [NEXT] or [PREV] buttons to scroll through list items. With each press, the next
item is highlighted. Press [ENTER/Display On] to select the highlighted item.
Before first fixture operation, set current date and time in the menu "Date &Time
Setings" (menu path: Personality--> Date &Time Setings).
7.1 Tab " Address"
.
Settings -.
Select the menu to set desired fixture address setting.
DMX Address - Select the menu to set the DMX start address
-
Ethernet Settings
Ethernet Mode - Use the menu to set the Ethernet operation mode:
.
.
Disable - The option disables Ethernet operation.
Artnet/MaNet - Fixture receives Artnet protocol (or MANet) - every fixture has to be
.
.
.
.
Ethernet To DMX - Fixture receives Artnet protocol from the Ethernet input and sends DMX
IP Address/Net Mask - Select this menu to set IP address. IP address is the Internet protocol
.
.
Default IP Address -Preset IP address, you can set up only first byte of IP address (2 or
Custom IP Address - The option enables to set up all bytes of IP address.
.
.
.
.
Net Mask - The option enables to set up all bytes of Net Mask.
.....
ArtNet Universe - Use this item to set a Universe (0-255). The Universe is a single DMX
MANet Settings - Use this menu to set parameters for MANet operation.
.
MANet Universe - The value of this item can be set in range 1-64.
.
.
.
.
MANet Session ID - The value of this item can be set in range 1-32.
The menu allows all needed settings for the Ethernet operation
connected to the Ethernet network.
data to its DMX output (fixture works as an "Artnet/DMX converter", next fixture can
be connected to its DMX output and you can build a standard DMX chain by
connecting another fixtures. Only one fixture has to be connected to the Ethernet.
address.The IP uniquely identifies any node (fixture) on a network.
There cannot be 2 fixtures with the same IP address on the network!
10) e.g. 002.0.05.086.
512 frame of 512 channels.
.
8
Advertisement
Table of Contents
