Accu-Chek Nano Owner's Booklet page 90

Control solution storage conditions
Electromagnetic Compatibility
This meter meets the electromagnetic immunity requirements as per ISO 15197 Annex A. The chosen basis
for electrostatic discharge immunity testing was basic standard IEC 61000‑4‑2. In addition, it meets the
electromagnetic emissions requirements as per EN 61326. Its electromagnetic emission is thus low. Interference
from the meter to other electrically‑driven equipment is not anticipated.
Performance Analysis
Refer to the test strip package insert.
Test Principle
Refer to the test strip package insert.
88
III
Protection class
The ACCU‑CHEK Nano meter is suitable for continuous operation.
Meter type
Refer to the control solution package insert.