Introduction; The Accu-Chek Nano Smartview System - Accu-Chek Nano Owner's Booklet

introduction

The ACCU‑CHEK nano SmartView System
The ACCU‑CHEK Nano SmartView blood glucose monitoring system is intended to be used for the
quantitative measurement of glucose (sugar) in fresh capillary whole blood samples drawn from the
fingertips or palm. The ACCU‑CHEK Nano SmartView blood glucose monitoring system is intended to be used
by a single person and should not be shared.
The ACCU‑CHEK Nano SmartView blood glucose monitoring system is intended for self testing outside the
body (in vitro diagnostic use) by people with diabetes at home as an aid to monitor the effectiveness of
diabetes control. The ACCU‑CHEK Nano SmartView blood glucose monitoring system should not be used for
the diagnosis of or screening of diabetes or for neonatal use. Alternate site testing should be done only
during steady‑state times (when glucose is not changing rapidly).
The ACCU‑CHEK SmartView test strips are for use with the ACCU‑CHEK Nano blood glucose meter to
quantitatively measure glucose (sugar) in fresh capillary whole blood samples drawn from the fingertips
or palm.
This system is intended to be used by a single person and should not be shared.
nOTE
The term "blood glucose" is used when referring to "blood sugar" in this booklet.
7