Accu-Chek Nano Owner's Booklet page 63

5. If On is selected, the hour
flashes. A‑1 and the bell
symbol remain on the display.
6. Press and release
select the hour. Press and
release to set the hour.
nOTE
When you are setting the time for the test reminders, the bell symbol and set‑up remain on the display.
7. The minutes flash. Press and
release
15, 30, or 45. These are the
only choices.
or to
8. Press and release
minutes. Am or pm flashes on
the display. Press and release
or
am and pm. Press and release
to set am or pm.
or to select 00,
to set the
to switch between
9. Set‑up, OFF, and the bell
symbol appear on the display
with the next test reminder
(A‑2) flashing. You can either
set a second test reminder or
press and hold until the
flashing test strip symbol
appears to exit.
61